Bird Brand Stud Fence Stain available in black and dark oak, discourages horses from biting fences and timber.
Bird Brand Fence Stain is a NEW environmentally friendly alternative to creosote. It is a water based stain. Bird Brand Stud Fence Stain is an easy to use, totally environmentally friendly product which is harmless to plants and animals.
The Bird Brand Stud Fence Stain has an enriched formulation which provides a water repellent finish and limits UV damage, providing a long lasting protective coat and preventing wood rot.
Bird Brand Stud Fence Stain is specially formulated to provide optimum protection and colour performance for stud fences, wooden posts, railings and other rough sawn wood products. The Bird Brand Stud Fence Stain has been formulated to discourage animals from chewing and biting on wooden substrates. This product provides a protective coating for wooden products and fences which is totally harmless to animals.
Ensure wood is clean and dry before application. Remove any dirt, moss, or fungal growth using a stiff bristle brush, before application.
Do not apply in wet conditions, during periods of high humidity or when temperatures are below 10°C. You may apply by brush, roller or airless spray. One coat of Bird Brand Stud Fence Stain will provide an attractive coating that resists the effects of fading for up to 3 years. A second coat can be applied if preferred.
Surface and Environment
Bird Brand Stud Fence Stain can be used on wooden products in areas such as livestock habitats and enclosures. Bird Brand Stud Fence Stain is safe to use around plants and animals. Animals should be kept away from treated areas until the product is thoroughly dry. If plants are splashed during application, wipe clean with a damp cloth before the product dries.
- Bird Brand Stud Fence Stain is safe for animals
- Discourages biting and chewing by animals
- Can be used on rough sawn timber
|Type:||Emulsion / Acrylic Coating|
|Stock Colours:||Dark Oak & Ebony Black|
|VOC Content:||Low / Non-Flammable|
|Application Method:||Brush, Roller or Airless Spray|
|Theoretical Coverage:||Up to 7sqm per litre (10 litres will approximately cover 70m2 in 1 coat, 35m2 for 2 coats)|
|Wet Film Thickness (WFT):||-|
|Dry Film Thickness (DFT):||-|
|Drying Time:||Rainproof in 2 hours in normal drying conditions.|
|Overcoatable:||After 4 hours at 20°C|
|Cleaner / Thinner:||Clean all tools with water and detergent after use.|
|Packaging:||Available in 10 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.