£9.95 delivery on orders excluding certain products & postcodes *
Centrecoat Water Based Driveway Paint, is a water-based paint designed specifically for use on driveways but can be applied to all hard surfaces, in order to enhance their appearance. Can be tinted to custom colours, minimum 20 litres, POA.
Centrecoat Water Based Driveway Paint is best used on Driveways, Paths and Pavements and produces a decorative and protective matt finish, in either Red or Black. It is highly waterproof and offers resistance to common spills such as oil and mild chemicals. Should not be used on imprinted driveways where silicone release agents have been used.
All surfaces should be clean, dry, sound and free from contaminants. Existing painted surfaces should be cleaned, degreased and sanded to ensure an adequate “key” is produced. Remove all loose, flaking material and treat bare areas as new substrate, then prepare accordingly.
Mix well before use. Apply via brush or roller. Do not apply below 7°C. Thin up to 10% with clean water as necessary. In confined spaces, provide adequate ventilation during application and drying. Do not paint when temperature will be at or below 7°C during the painting and drying process. Apply a coat of Centrecoat Water Based Driveway Paint thinned 10% with clean water on porous surfaces, otherwise apply direct.
DO NOT apply over a PVA sealer. DO NOT paint in direct sunlight, on windy days, or when rain is expected within 6 hours or night time temperatures falling below dew point.
Centrecoat Water Based Driveway Paint can be applied to all tarmac, asphalt and concrete surfaces and is regularly used in car parks, driveways and tennis courts as it provides a non-slip finish.
Components: | One Part |
Type: | Water Based |
Finish: | Matt |
Stock Colours: | Black, Red |
Tintable: | No |
VOC Content: | 41.0g per Litre |
Volume Solids: | 34 - 36% |
Suitable Substrates: | For asphalt and tarmac driveways |
Application Method: | Brush or Roller |
Theoretical Coverage: |
Approx 5 to 9 m2 per litre at 35 microns. The practical spreading rate may be lower as this depends on factors such |
Wet Film Thickness (WFT): | 100 - 110 microns |
Dry Film Thickness (DFT): | 35 - 40 microns |
Induction Time: | - |
Pot Life: | - |
Touch Dry: | 1 hour at 20°C |
Overcoatable: | 6 hours at 20°C |
Fully Cured: | 5 - 7 days at 20°C |
Cleaner / Thinner: | Water |
Shelf Life: | 2 years in original unopened packaging |
Packaging: | Available in 5 and 20 (4 x 5) Litres |