Oil Technics Bio TA Oil Stain Remover for Tarmac and Asphalt, it quickly digests and removes oil stains from driveways, patios, paths, roads, and car parks surfaces.
Bio TA Oil Stain Remover for Tarmac and Asphalt is a great way to remove oil stains from Driveways, Patios and Carparks. Oil Stains can quickly erode a break down surface structures when left untreated on Tarmac and Asphalt. Bio TA Oil Stain Remover for Tarmac and Asphalt is available in 5 Litre Tubs and is brought to you at excellent competitive and cost effective rates.
Bio TA Oil Stain Remover for Tarmac and Asphalt has been specially designed to degrade the oil stain using BioTA by digesting and removing the oil contamination. Bio TA Oil Stain Remover for Tarmac and Asphalt is a great way of cleaning driveways and patios, roads and paths, and should be used on Asphalt and Tarmac Primarily.
BioTA Oil Stain Remover for Tarmac and Asphalt should be shaken vigorously before application to allow liquid to suspend into the solution. Firstly wet the oil stain with water before applying you Bio TA solution to the oil stain. Brush in your Bio TA Oil Stain Remover and leave for approximately 15-20 minutes. After this time period has elapsed rinse the surface clean with fresh water and you oil stain will have been removed.
Surface and Environment
BioTA Oil Stain Remover for Tarmac and Asphalt is part of the fabulous range of Cleaners we have for Driveways and Patios and is designed for use in dry conditions for optimum performance on Tarmac and Asphalt primarily. Please contact if you wish to find out more information on which surfaces you can use BioTA Oil Stain Remover on.
|Suitable Substrates:||For driveways, patios, paths, roads and car park surfaces|
|Wet Film Thickness (WFT):||-|
|Dry Film Thickness (DFT):||-|
|Cleaner / Thinner:||Clean water|
|Packaging:||Available in 5 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.