Dilution for Keim Concretal W and Keim Concretal Lasur concrete protection coatings. Reacts chemically with the surface.
Keim Concretal Dilution comprises of liquid potassium silicate and stabilisers which react chemically with the surface to which it is applied. Specially formulated for use with the Keim Concretal W and Keim Concretal Lasur colourwash systems.
Keim Concretal Dilution should be applied by brush or roller, working well into all surfaces. After a minimum period of 12 hours the Keim Concretal W or Keim Concretal Lasur system may be applied.
For the best finish possible, Promain recommend the use of KEIM's Facade Brush for the best application.
- Water vapour permeable
- Consolidates the surface
|Type:||Water vapour permeable - non toxic|
|Material Characteristics:||Density: Q =1.047g/cm3|
|Suitable Substrates:||Dilution for concrete protection coatings Keim Concretal and Keim Concretal Lasur|
|Application Method:||Brush or Roller|
|Theoretical Coverage:||10m2 per litre|
|Wet Film Thickness (WFT):||-|
|Dry Film Thickness (DFT):||-|
|Application Conditions:||Ambient and substrate temperature above 5°C and below 30°C|
|Cleaner / Thinner:||Clean immediately after use with water.|
|Shelf Life:||Approx 12 months if kept cool bust frost free in tightly closed containers|
|Packaging:||Available in 5 Litres and 20 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.