SKU: ID21409
UN1263 (Class: 3, Pk Grp: III)
Coo-Var Oil Based Brick and Tile Paint
An oil based alkyd based gloss red finish for most brickwork, masonry or stone.
Available in 2.5 and 5 Litres in Gloss Red
3. Select a Qty
As low as:
£39.78
Inc VAT
£47.74
As low as:
Inc VAT
PRODUCT DETAILS
Coo-Var Oil Based Brick and Tile Paint is an alkyd based versatile gloss red finish for most brickwork, masonry or stone.
Best Uses
Coo-Var Brick and Tile Paint Gloss Red is ideal for use on porches, front walls, out buildings, most brickwork, masonry or stone.
Application
Ensure all surfaces are clean, dry and free from grease, oil and any other contaminates. Use Coo-Var Masonry Stabiliser on unstable brick, screed or plaster prior to painting. Existing painted surfaces should be cleaned, degreased and sanded to ensure an adequate "key" is produced. Remove all loose, flaking material and treat bare areas as new substrate, then prepare accordingly.
Mix well before use. Apply direct to stable surfaces.
TECHNICAL
| Components: | Single Pack |
| Type: | Oil Based Alkyd |
| Finish: | Gloss |
| Stock Colours: | Red |
| Tintable: | No |
| VOC Content: | 399 g/L |
| Volume Solids: | 49% |
| Suitable Substrates: | For use on most brickwork, masonry or stone |
| Application Method: | Brush, Roller or Airless Spray |
| Theoretical Coverage: | 13 m2 per litre at 40 microns |
| Wet Film Thickness (WFT): | 75 microns |
| Dry Film Thickness (DFT): | 35 - 40 microns |
| Induction Time: | - |
| Pot Life: | - |
| Touch Dry: | 5 hours at 20°C |
| Overcoatable: | After 12 hours at 20°C |
| Fully Cured: | 5 - 7 days at 20°C |
| Cleaner / Thinner: | Teamac Thinners 14 |
| Shelf Life: | See container |
| Packaging: | Available in 2.5 and 5 Litres |
