Coo-Var Polyguard PU Floor Paint

A high-performance two-pack polyurethane topcoat for use on both walls and floors.

Available in 5 litre tins. Can be tinted to most BS & RAL colours.

* These colours are for guidance only. Variations between output devices can misrepresent the appearance of an actual colour. Also, we strongly advise that you order your complete paint requirements simultaneously to ensure a uniform batch colour.

2. Size

3. Select a Qty

As low as:

£218.88

Inc VAT £262.66

PRODUCT DETAILS

Coo-Var PolyGuard PU Floor Paint is a high-performance two-pack polyurethane topcoat, which has been specially formulated for outstanding chemical and UV resistance.

Best Uses

PolyGuard PU Floor Paint is suitable for use on both walls and floors, and is ideal for use in factories, warehouses, and other industrial environments where durable, chemical and UV-resistant protection is essential. Suitable for interior and exterior use. Coo-Var PolyGuard PU Floor Paint is for professional use only.

Available in, BS, NCS and RAL colours
Chemical Resistant
Tough and Durable
UV Resistant
Interior & Exterior Use

Application

Always ensure the surface to be coated has been properly prepped prior to application. The surface should be free from contaminents, and all bare concrete surfaces
should be mechanically abraded, shotblasted or if not possible, treated with Coo-Var Acid Etch.

Newly laid concrete should be left to cure prior to painting, (recommended 1 month per 3cm of slab thickness). Porous and shiny surfaces should be primed with Coo-Var ProSeal High Performance Primer. Wood, plaster and metal should also be suitably prepared.

Before applying to previously painted surfaces check with Promain's Technical Team for further advice.

N.B. when using multiple tins you should check that they all have the same batch number, this is to avoid slight variations in shade. We do not reccomend this product to be used over conventional solvent based paints.

TECHNICAL

Components:	Two Pack
Type:	Polyurethane
Finish:	Gloss
Stock Colours:	White
Tintable:	Yes. Please note, bespoke tints are non refundable / exchangeable
VOC Content:	498 g/litre
Volume Solids:	51%
Suitable Substrates:	Concrete, Wood, Metal, GRP
Application Method:	Brush or Short Hair Nap Mohiar Roller
Theoretical Coverage:	30 to 35 sq.m / 5 Litre unit
Wet Film Thickness (WFT):	142 to 167µm
Dry Film Thickness (DFT):	73 to 85µm
Induction Time:	-
Pot Life:	6-8 hours at 20°C
Initial Cure:	3-4 hours at 20°C
Hard Cure:	16 to 24 hours at 20°C
Overcoat Time:	Minimum 16 hours at 20°C
Fully Cured:	5 to 7 days at 20°C
Cleaner / Thinner:	Brushwash Q607/7
Shelf Life:	years from date of production unopened or 'use by' date where specified
Packaging:	Available in 5 Litres