Coo-Var Profloor Plus Anti-Slip Aggregate Component M112/3 provides an anti-slip surface to Coo-Var Profloor and Coo-Var Proflooor Cold Cure.
Coo-Var Profloor Plus Anti-Slip Aggregate Component is designed to be used with Coo-Var Profloor and Coo-Var Profloor Plus Cold Cure for an anti-slip floor finish.
Coo-Var Profloor Plus Anti-Slip Aggregate Component is a large particle size anti-slip aggregate component to be used to create an anti-slip finish to Coo-Var Profloor and Coo-Var Profloor Plus. It offers a high level of anti slip properties for areas where this Health and Safety measure is essential.
Coo-Var Profloor Plus Anti-Slip Aggregate Component is scattered across the wet surface of Coo-Var Profloor and Coo-Var Profloor Plus Cold Cure, producing an anti-slip finish on treated floors. Each pack contains 440g and has a theoretical coverage rate of 20 square metres.
Surface and Environment
Coo-Var Profloor Plus Anti-Slip Aggregate Component can be used on almost any interior and exterior surfaces (providing the paint product meets the surface specifications).
- Coo-Var Profloor Plus Anti-Slip Aggregate Component is for use with Coo-Var Profloor products to create an anti-slip finish
- Method of Application: Scatter evenly over Coo-Var Profloor and Coo-Var Profloor Plus (whilst tacky)
- Seal with a second coat of Coo-Var Profloor/Profloor Plus Floor paint.
|Type:||Anti Slip Aggrefate (0.54 - 0.71mm)|
|Suitable Substrates:||To be used to create anti-slip element to Profloor Plus finish|
|Theoretical Coverage:||20 m2 per can to be scattered evenly|
|Packaging:||Available in 440g|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.