Coo-Var Profloor Plus FH (Fast Hardening) is a fast curing version of our Coo-Var Profloor Plus. Designed as a two pack, solvent free epoxy resin coating to allow the laying and recoating of a surface within the same working day if requirements are met.
Suitable for most industrial floor environments on concrete, polymer screed, asphalt etc. Provides a durable, decorative attractive and easily cleanable surface. The faster speed of cure makes this product particularly useful in the recoating of areas with minimal delay or down time.
Being low odour, Coo-Var Profloor Plus FH (Fast Hardening) is ideal for use in the food industry for preparation, processing, storage areas, bakeries, dairies and breweries etc. where solvent based products are unsuitable. The hard wearing and chemical/oil resistant properties also make Coo-Var Profloor Plus FH (Fast Hardening) ideal to use in showrooms, display areas, supermarkets, warehouses and workshops.
Coo-Var Profloor Plus FH (Fast Hardening) a fast hardening grade with good chemical resistance, Coo-Var Profloor Plus FH (Fast Hardening) should not be applied in temperatures below 15°C. New concrete must be clean, fully cured and preferably shot blasted or chemically etched.
|Tintable:||Please note, bespoke tints are non refundable / exchangeable|
|Suitable Substrates:||For industrial environments, on concrete, polymer screeds, asphalt etc|
|Application Method:||Notched Trowel, Squeegee, Roller|
|Theoretical Coverage:||4 - 5 m2 per Kg per coat|
|Wet Film Thickness (WFT):|
|Dry Film Thickness (DFT):||180 - 200 microns|
|Pot Life:||15 minutes at 20°C|
|Foot Traffic:||8 - 10 hours at 20°C|
|Overcoatable:||After 3 - 4 hours at 20°C|
|Cleaner / Thinner:||Coo-Var Thinners 16|
|Shelf Life:||2 years unopened in original packaging|
|Packaging:||Available in 5 Kg|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.