Coo-Var Suredeck is best used in areas where slip resistance is important. e.g. garden decking or other decked areas. It is suitable for use on prepared tanalised, soft or hardwood
decking. However if you have any doubts as to whether this product is suitable for you, please contact our Technical Team for further information.
All surfaces should be clean, dry, sound and free from contaminants, physically remove as much algae, lichen, moss or fungi, preferably by powerwash and then treat with a suitable
If applying to new wood, this should be sanded prior to coating to ensure an adequate "key" is achieved. If applying to existing painted surfaces, these should be cleaned, degreased and sanded to ensure an adequate "key" is achieved. Make sure to remove all loose, flaking material and treat bare areas as new substrate then prepare accordingly. Always ensure the area is dry before painting, and test a small area first to ensure that the product adheres.
Apply a minimum of 2 coats, ensuring it is brushed out well, do not leave to pool in the grooves. Do not apply if the temperature is likely to drop below 10 °C during application or during the drying process.
|VOC Content:||Max 83 g/litre|
|Suitable Substrates:||Tanaiised wood|
|Application Method:||Brush, Roller (on smooth surfaces)|
|Theoretical Coverage:||8-10 sq.m / litre @ 33 to 42 microns D.F.T|
|Wet Film Thickness (WFT):||100 to 125 microns|
|Dry Film Thickness (DFT):||33 to 42 microns|
|Touch Dry:||1.5 hours at 20°C|
|Overcoatable:||After 6 hours at 20°C|
|Fully Cured:||3-5 days at 20°C|
|Cleaner / Thinner:||Clean Water|
|Shelf Life:||2 years from date of production unopened|
|Packaging:||Available in 2.5 and 5 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.
For the multi-surface removal of moss, mildew and algae and the prevention of regrowth. This concentrate will treat up to 40m2.
A solvent based industrial floor paint designed for interior and exterior use.