Full Product Catalogue

A 2 pack, high gloss, low VOC, high solids, fast curing, acrylic polyurethane primer / finish pigmented with zinc phosphate.

A high solids, abrasion resistant, aluminium pure epoxy primer. Provides excellent long term anti-corrosive protection and low temperature capability....

Provides up to 2 hours fire protection on 'I' sections beams (including cellular beams), columns and hollow sections.

Intumescent coating for 60 minutes fire resistance to structural steelwork.

A tough, hard wearing finish coat for application over properly primed surfaces.

A two part, abrasion resistant pure epoxy coating pigmented with aluminium to give excellent long term anti-corrosive protection offshore or below wat...

A two component, rapid recoat, fast curing solvent based inorganic zinc rich ethyl silicate primer.

Complete with MIO, Intercure 200HS can speed up production and throughput in fabrication shops.

For the treatment of weld seams, lap joints & kerb angles.

A light coloured, tar free, surface tolerant, universal primer with high volume solids (82%). Intergard 5000 is also tolerant of damp surfaces.

A two component, metallic zinc rich epoxy primer, designed to provide excellent corrosion resistance.

A two component, solvent free epoxy which can be applied underwater and will cure underwater.

A two component, low VOC, high solids, fast drying polyaspartic high gloss primer / finish coating.

A two pack epoxy abrasion resistant coating, containing micaceous iron oxide.