Light Clean 99350 is best used for cleaning and degreasing of painted surfaces before recoating. It is especially suited for the removal of dirt, soot and u.v. light degraded surface-layers.
Availability: Not included in Group Assortment. Availability subject to special agreement.
Hempel Light Clean 99350 is suitable for use in high pressure cleaning equipment. Application is by brush or by spraying using lowest possible pressure.
Dilute with fresh water: 1-20 parts of fresh water to 1 part of the product. After 5 minutes the surface must be high pressure hosed with fresh water or carefully scrubbed with plenty of fresh water until all residues have been removed. If the product leaves a white film, it can be removed with warm water.
|VOC Content:||0 g/l|
|Suitable Substrates:||For cleaning and degreasing of painted surfaces before recoating.|
|Application Method:||Apply by stiff brush or by spraying using lowest possible pressure.|
|Cleaner / Thinner:||To be diluted with fresh water: 1-20
parts of fresh water to 1 part of the product.
|5 years from date of production unopened|
|Packaging:||Available in 5 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.