International Intersleek 1100SR
International Intersleek 1100SR is an advanced fluoropolymer foul release coating for the control of slime, which provides up to 9% fuel savings and CO2 reductions compared to conventional antifouling coatings.
Best Uses
Intersleek 1100SR is designed for application onto the underwater hull. It provides the best efficiency for vessels from the start and throughout the vessel life cycle. Over 6,400 ships have been coated with Intersleek technology within the last 20 years, delivering cost savings under the current and future environmental regulation.
It is suitable for use at Newbuilding or Maintenance & Repair.
Application
The recommended application method is Airless Spray. Brush or Roller are recommended for small areas only, and multiple coats may be required to achieve specified film thickness. Please note: Application by conventional spray is not recommended.
Ensure all surfaces are clean, dry and free from contamination. High pressure fresh water wash or fresh water wash, as appropriate, and remove all oil or grease, soluble contaminants and other foreign matter in accordance with SSPC-SP1 solvent cleaning.
Surface Preparations
Intersleek 1100SR must always be applied over Intersleek tie coat within the required overcoating interval.
Certificates and Approvals
When used as part of an approved scheme, Intersleek 1100SR has the following certification:
Product recognised by the following classification societies as compliant with the International Convention on the Control of Harmful Anti-fouling Systems on Ships, 2001 (AFS 2001):
- Bureau Veritas
- DNV GL
- Lloyds Register
- Korean Register of Shipping
Technical Info
| Components: | Three Components |
| Type: | Foul Release Coating |
| Finish: | Gloss |
| Stock Colours: | Grey, Blue, Red, Black |
| Tintable: | Yes. Limited colour tints are available. Please note, bespoke tints are non refundable / exchangeable |
| VOC Content: | 240 g/lt |
| Volume Solids: | 72% ±2% |
| Suitable Substrates: | Designed for application onto the underwater hull |
| Application Method: | Airless Spray, Brush |
| Theoretical Coverage: | Range: 4.80 - 3.60 m²/litre at 150 - 200µm dft |
| Wet Film Thickness (WFT): | 208-278µm |
| Dry Film Thickness (DFT): | 150-200µm |
| Induction Time: |
Not Required |
| Pot Life: | 60 minutes at 25°C |
| Touch Dry: | 2 hours at 25°C |
| Overcoatable: | See Product Data Sheet |
| Fully Cured: | 4 hours at 25°C |
| Cleaner / Thinner: | Thinning is not recommended. Clean equipment with International GTA007 / GTA822 |
| Shelf Life: | 12 months from date of production unopened |
| Packaging: | Available in 10 Litres |
