Johnstone’s Acrylic Durable Eggshell provides a low odour, quick drying finish that is resistant to condensation and regular cleaning, making it ideal for use in kitchens, bathrooms, hospitals, hotels, foodstores, bakeries and public buildings. Suitable for interior use.
Ideal for wood, metal and plaster. Also suitable for use on wallboards, concrete, cement rendering, brickwork and blockwork in internal situations.
All surfaces to be painted should be clean, dry and free from loose and flaking material. Prime bare surfaces with the appropriate Johnstone’s Primer. Rub down previously gloss painted surfaces with fine waterproof abrasive paper and rinse thoroughly before applying a pre-coat of Johnstone’s Joncryl Water Based Primer Undercoat. Avoid the inhalation of dust. Wear a suitable face mask if dry sanding. Special precautions should be taken during surface preparation of pre-1960’s
paint surfaces over wood and metal as they may contain harmful lead.
Stir well. Easy to apply by brush or roller. Seal absorbent surfaces with a coat of Acrylic Eggshell thinned up to 10% with clean water. If more than one can of a colour is to be used in the same area, intermix before use. Do not apply in temperatures below 10˚C.
|Tintable:||Yes to Johnstones 16,000 Colour Range. Please note, bespoke tints are non refundable / exchangable.|
|VOC Content:||Low VOC content 0.3–7.99%|
|Suitable Substrates:||Wood, metal and plaster. Also suitable for use on wallboards, concrete, cement rendering, brickwork and blockwork in internal
|Application Method:||Brush or roller|
|Theoretical Coverage:||11 - 13 m2 per litre|
|Wet Film Thickness (WFT):||83μm|
|Dry Film Thickness (DFT):||30μm|
|Touch Dry:||1 - 2 hours|
|Recoatable:||3 - 4 hours|
|Cleaner / Thinner:||Water|
|Packaging:||2.5 and 5 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.