Bedec Spray Day Light

Non Hazardous
A sprayable, water based, fast drying flat matt emulsion for interior walls and ceilings.
Available in 5 Litres in Bright White
From £51.90 £43.25
In stock
Only %1 left
Product Description

Bedec Spray Day Light is a sprayable, water based, fast drying flat matt emulsion for interior walls and ceilings.

Best Uses

Bedec Spray Day Light is an ideal solution for the fast application of internal wall paint via spray. Offering a flat matt, high opacity, bright white finish, this wall paint also benefits non yellowing.

When applying a 60 micron coating, Bedec Spray Day Light benefits from a 95% opacity that is equivalent to 120 microns in similar competitor's product ranges.

Bedec Spray Day Light is ideal for contractor refurbishment of internal buildings before new tenants arrive such as dilapidation projects due to its fast application and high opacity.

  • Flat Matt
  • Anti-Reflective
  • Non Yellowing
  • Breathable
  • Low Odour
  • Wipeable
  • Low Flashing


Stir thoroughly, check colour before use. Apply via spray, roller or brush. Do not apply at temperatures below 8°C. Ensure all surfaces are free from oil, grease, dirt, dust and loose particles. On existing painted surfaces remove all loose and flaking paint and rub down with abrasive paper where necessary. Areas affected by mould should be treated with a fungicidal wash.

On plasterboard or any porous substrate prime the surface by applying a first coat thinned with approx 30% clean water. After preparation, apply at least one full coat and allow to dry. Then apply a further coat if necessary to ensure even coverage.

If applying by airless spray, use a 15-17 thou tip, pressure 2500 - 3000psi fan width 12 inch, 50°.

Technical Details
Components: Single Pack
Type: Water Based
Finish: Flat Matt
Stock Colours: Bright White
Tintable: Yes, to pastel colours. Please note, bespoke tints are non-refundable / exchangeable
VOC Content: 0 - 25%
Volume Solids:  
Suitable Substrates: Internal walls and ceilings
Application Method: Brush, Roller or Airless Spray
Theoretical Coverage: 50m2 for 5 Litres depending on substrate texture, porosity and application method.
Wet Film Thickness (WFT): 60 microns
Dry Film Thickness (DFT):  
Induction Time: -
Pot Life: -
Touch Dry: 2 hours at 18°C
Overcoatable: 4 hours at 18°C
Fully Cured: -
Cleaner / Thinner: Clean up tools and equipment with water immediately after use
Shelf Life: 2 years minimum in original unopened containers.
Packaging: Available in 5 Litres
Product Video

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use