Johnstone's Trade Microbarr Anti Bacterial Acrylic

SKU
id17295
Non Hazardous
A high performance, tough acrylic resin based interior coating, formulated to assist in the fight against hospital acquired infections, caused by harmful bacteria.
Available in 5 Litres in Matt and Eggshell Finishes. Tintable to Over 16,000 Colours.
From £135.86 £113.22
In stock
Only %1 left
Product Description

Johnstone's Trade Microbarr Anti Bacterial Acrylic is a high performance, tough acrylic resin based interior coating, formulated to assist in the fight against hospital acquired infections, caused by harmful bacteria.

Best Uses

Johnstone's Trade Microbarr Anti Bacterial Acrylic is formulated using Silver Ion technology, Johnstone’s Microbarr is proven to actively inhibit MRSA and E-Coli over the painted surface. Available in Matt and Eggshell finishes. This product is suitable for interior use in areas of high traffic and when hygiene protection is required such as vets, hospitals, surgeries, clinics and more.

Suitable for application over block work, brickwork, cement render, concrete, plaster, plasterboard and wall boards.

Application

All surfaces should be sound, clean, dry and free from grease. Remove any crazed or flaking paint. Rub down sound glossy surfaces with fine waterproof abrasive paper and rinse thoroughly before applying a pre-coat of Johnstone's Acrylic Primer Undercoat. Avoid the inhalation of dust. Wear a suitable face mask if dry sanding. Special precautions should be taken during preparation of pre-1960s paint surfaces over wood and metal as they may contain harmful lead. For further advice contact Technical Advisory. Seal absorbent surfaces with a solution of up to 1 part water to 4 parts Anti-Bacterial Acrylic. Prime bare timber and metal surfaces with an appropriate Johnstone's primer. Allow radiators to cool before painting.

Technical Details
Components: One Part
Type: Acrylic Resin Based
Finish: Eggshell and Matt
Stock Colours: Brilliant White, Magnolia
Tintable: Available in a range of colours via the Johnstone’s tinting system. Please note, bespoke tints are non refundable / exchangeable.
VOC Content: 30.0g per Litre
Volume Solids: 36%
Suitable Substrates: For internal walls and ceilings
Application Method: Brush, Roller, Spray
Theoretical Coverage: 12 m2 per litre
Wet Film Thickness (WFT): 83 microns
Dry Film Thickness (DFT): 30 microns
Induction Time: -
Pot Life: -
Touch Dry: 1-2 hours at 20°C
Overcoatable: After 3-4 hours at 20°C
Fully Cured:
Cleaner / Thinner: Water
Shelf Life: 5 years
Packaging: Available in 5 Litres

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use