Jotun Penguard Pro GF

Part A: UN1263 (Class: 3, Pk Grp: III)
A two-pack epoxy paint coating that is reinforced with glass flake. Highways Approved Item No.123.
Available in 20 Litres
From £233.69 £194.74
In stock
Only %1 left
Product Description

Jotun Penguard Pro GF is a 2 pack epoxy paint coating that is reinforced with glass flake. Jotun Penguard Pro can be applied as a high build paint coating with a theoretical coverage of 3m2 per litre. Penguard Pro GF is approved by the Highways Agency, Item No.123.

BBA Approval Logo

Best Uses

Penguard Pro GF is a universal primer that has been formulated for application to steel that is exposed to harsh conditions, suitable for application in new construction projects. Jotun Penguard Pro GF also offers very good compatibility with cathodic protection.

Penguard GF is a glass flake epoxy that can be used as a final finish or can be over coated (within a limited time span) with a Jotun topcoat such as Hardtop XP to provide a cosmetic gloss finish.


Jotun Penguard Pro GF can be applied using brush, roller or airless spray. With decent drying times, this coating will be dry after 3 hours at temperatures of around 23°C, however will increase and decrease depending on warmer and colder conditions. Extra care should be taken during application to ensure the correct film thickness's are achieved. For more information regarding application, please read the product data sheet prior to application.

Surface and Environment

Being a highways agency approved product, Jotun Penguard Pro GF has been designed for external application as a high build paint coating. With excellent water resistance and abrasion resistance, Jotun Penguard offers an abundance or protection as well as being available in a massive range of different colours to suit the surround environment.

Technical Details


  • Highways Agency, Item No.123
  • BBA HAPAS certified for the corrosion protection of structural steelwork in highway applications
  • Pre-qualification testing in accordance with NORSOK M-501, Rev. 5, System 1, suitable for exterior exposure in offshore environment, below 120°C
  • Pre-qualification testing in accordance with NORSOK M-501, Rev. 5, System 7, suitable for splash zones

Technical Info

Components: Two Part
Type: Amine cured, glass flake reinforced, abrasion resistant epoxy coating
Finish: Semi Gloss
Stock Colours: Grey (Black and Red are made to order)
Tintable: Yes. Check with Sales Team for specific colours. Please note, bespoke tints are non refundable / exchangable.
VOC Content: 227.0g per litre
Volume Solids: 75%
Suitable Substrates: Carbon steel, stainless steel, aluminium, galvanised steel and thermally sprayed zinc substrates
Application Method: Airless Spray or Brush
Theoretical Coverage: 5 - 1.3m2 per litre
Wet Film Thickness (WFT): 200 - 800 microns
Dry Film Thickness (DFT): 150 - 600 microns
Induction Time: 10 mins at 23°C
Pot Life: 1 hour at 23°C
Touch Dry: 6 hours at 10°C
Overcoatable: 7 hours at 10°C
Fully Cured: 12 days at 10°C
Cleaner / Thinner: Jotun Thinner No. 17
Shelf Life: 12 months for Part A, 24 months for Part B
Packaging: Available in 20 Litres

Related Products