SKU: ID17005
Non Hazardous

Jotun Steelmaster 1200 WF

A 1 pack waterborne acrylic thin film intumescent coating. For structural steel exposed to cellluosic fire up to 120 minutes.
Available in White in 18.5 Litres
* These colours are for guidance only. Variations between output devices can misrepresent the appearance of an actual colour. Also, we strongly advise that you order your complete paint requirements simultaneously to ensure a uniform batch colour.
3. Select a Qty
As low as:
£269.07
Inc VAT £322.88
PRODUCT DETAILS

Jotun Steelmaster 1200 WF is a single component waterborne acrylic thin film intumescent coating for use to provide fire protection of structural steel exposed to celulosic fire up to 120 minutes.

Best Uses

Jotun Steelmaster 1200 WF is a single component waterborne acrylic thin film intumescent basecoat normally applied by airless sprayer for use under Jotun Pioner Topcoat that has been independently approved for fire protection of structural steel exposed to celluosic fire in C1 to C3 environments. Suitable for various applications including airports, hotels, school buildings, train stations, stadia, shopping malls and many more.

Steelmaster 1200WF is compatible with a range of Jotun primers and topcoas to suit your products specification.

Application

Jotun Steelmaster 1200 WF is a water based full-passive intumescent coatings especially formulated for application to structural steel. Jotun Steelmaster 1200 WF has been developed as a high build coating that is ideally applied by airless sprayer.

Jotun Steelmaster 1200 WF is able to provide up to two hours fire protection to most structural steel sizes subject to the correct thickness being applied. For calculations and advise on applying this and any other intumescent coating be it 30 minute or up to 120 minute as well as Class 'O' Spread of Flame, please contact the technical department at Promain.

Intumescent paint coatings are designed to expand in the event of a fire creating an insulating barrier around the steel slowing down the time taken for the steel to distort and finally collapse. Jotun Steelmaster has been tested to BS476 Part 20/21.

Please contact our technical team for loadings information in regards application prior to use.

IMPORTANT INTUMESCENT PRODUCT NOTE: Always contact Promain’s technical team prior to purchase to obtain a tailored project specification and the advice necessary. The information displayed on this website should only be used as a guide. Promain UK Limited will not be held liable for any resulting damage to property, human life or monetary costs incurred due to incorrect specification, preparation, application or maintenance that has occurred due to negligence by either the purchaser or applicator. This includes your failure to have contacted us to obtain the relevant advice/specification.

TECHNICAL

Approvals

  • BS 476 part 20/21 - Fire tests on building materials and structures. Methods for determination of the fire resistance of loadbearing elements of construction
  • ASTM E84 - Standard Test Method for Surface Burning Characteristics of Building Materials
  • CE marked product with European Technical Assessment ETA-16/0513

Technical Info

Components: One Part
Type: Waterborne acrylic thin film intumescent coating
Finish: Semi Matt
Stock Colours: White
Tintable: No
VOC Content: 30.0g per litre
Volume Solids: 69%
Suitable Substrates: Apply on approved primers on carbon steel substrates
Application Method: Airless Spray or Brush
Theoretical Coverage: All steel sections must be coated with correct film thickness to achieve the required fire rating. Please contact our technical team to
see current loading tables and for further advice
Wet Film Thickness (WFT): 300 - 1000 microns
Dry Film Thickness (DFT): 210 - 690 microns
Induction Time: -
Pot Life: -
Touch Dry: 4 hours at 10°C
Overcoatable: 16 hours at 10°C
Fully Cured: -
Cleaner / Thinner: Water
Shelf Life: 6 months
Packaging: Available in 18.5 Litres

RELATED PRODUCTS

Navigating through the elements of the carousel is possible using the tab key. You can skip the carousel or go straight to carousel navigation using the skip links.
Jotun Penguard Express
From £176.70
(£212.04 Inc VAT)
Jotun Steelmaster 600WF
From £77.35
(£92.82 Inc VAT)
Jotun Conseal Touch-Up
From £49.66
(£59.59 Inc VAT)
Jotun Hardtop XP
A hard wearing top coat for use in aggressive atmospheric exposure. Network Rail approved. Highways Approved Item No 168
From £80.48
(£96.58 Inc VAT)
Jotun Pilot QD Primer
From £36.83
(£44.20 Inc VAT)
Jotun Hardtop Pro
A two pack, high solids, high gloss topcoat for industrial use in offshore corrosive environments. Cures down to 0°C.
From £151.87
(£182.24 Inc VAT)
Jotun Hardtop AX
From £111.35
(£133.62 Inc VAT)