KEIM Soldalit Grob

SKU
id16307
Non Hazardous
A primary coat and filler for the Keim Soldalit system. Can be used to bridge hairline cracks and equalise the surface.
Available in 5 and 18 Kg
From £97.03 £80.86
In stock
Only %1 left
Product Description

Keim Soldalit Grob is a primary coat and filler for the Keim Soldalit system. Can be used to bridge hairline cracks and equalise the surface.

Best Uses

Keim Soldalit Grob is suitable on all absorbent mineral surfaces and sound and previously painted surfaces for filling and closing of hairline cracks and equalising differences in texture. This product may be used in conjunction with the other components of the Keim Soldalit system. Keim Soldalit Grob is not suitable for use as a top coat. Keim Soldalit Grob is a ready to apply, highly filled sol silicate mineral based paint.

  • Multi purpose application
  • Equalises differences in texture
  • Alkaline
  • Non flammable
  • Water vapour permeable, non film forming, microporous
  • Free from solvents and biocides

Application

All loose, flaking and unstable material must be identified and then thoroughly removed, all surfaces must be thoroughly washed down with clean cold water to remove all surface dirt and dust. When all surfaces are clean, sound, wind dry, dust free and free from all surface contaminants, application using Keim Soldalit Grob may proceed.

Keim Contact Plus can be used instead of Keim Soldalit Grob as a base coat for large cracks over 1mm in width or where there is a need to equalise the surface.

In most instances Keim Soldalit Grob should be applied undiluted system and can be applied by brush, roller, or, spray. After a minimum waiting period of at least 12 hours Keim Soldalit in the chosen colour may be applied.

Technical Details

Components: Single Pack
Type: Primary coat and filler
Finish:
Stock Colours: White
Tintable: No
Suitable Substrates: All absorbent mineral surfaces
Application Method: Brush, Roller, or Spray
Theoretical Coverage: Approx. 0.25kg/m2 KEIM Soldalit Grob
Application Conditions: Ambient and substrate temperature above 5°C and below 30°C
Overcoatable: After a minimum waiting period of at least 12 hours KEIM Soldalit in the chosen colour may be applied
Cleaner / Thinner: Clean tools with water immediately after use
Shelf Life: Approx. 12 months, if kept cool but frost free in tightly closed containers
Packaging: Available in 5 Kg and 18 Kg containers

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use