KEIM Contact Plus

SKU
id16303
Non Hazardous
A highly filled silicate based priming coat, used as a bonding bridge between sound, existing coatings and Keim Mineral Paints.
Available in 5 and 25 Kg
From £95.16 £79.30
In stock
Only %1 left
Product Description

Keim Contact Plus is a highly filled silicate based priming coat, used as a bonding bridge between sound, existing coatings and Keim Mineral Paints.

Best Uses

Keim Contact Plus is best used for application onto sound, previously painted surfaces in preparation for coating using Keim Mineral Paints and/or for filling hairline cracks up to 0.5mm in width and to equalise differences in substrate texture.

Keim Contact Plus can fill cracks (up to max. 0.5mm in width), equalises textures, is non film forming, UV resistant, non flammable and is breathable.

Application

All loose, flaking and unstable material must be identified and then thoroughly removed, all surfaces must be thoroughly washed down with clean cold water to remove all surface dirt and dust. When all surfaces are clean, sound, wind dry, dust free and free from all surface contaminants, decoration using Keim Mineral Paints may proceed.

Dilute Keim Contact Plus with Keim Granital Dilution 1lt per 10kg. Apply uniformly with brush or roller.

Keim Contact Plus must be over-coated with one or two coats of Keim Granital, Keim Royalan, Keim Soldalit or Keim Concretal W. With light colours apply only one opaque finishing coat undiluted. Darker colours may require two subsequent coats. Allow at least 12 hours drying time between individual coats.

Technical Details

Notes

  • Dilute Keim Contact Plus with Keim Granital Dilution 1lt per 10kg
  • Apply uniformly with brush or roller
  • Do not apply in direct sunlight or onto sun-heated surfaces , nor if it is raining or if there is an immediate likelihood of rain

Technical Info

Components: Single Pack
Type: Silicate Based
Finish: -
Stock Colours: White
Tintable: No
VOC Content: -
Material Characteristics: Specific Weight: 1.74g/cm3, Maximum Grain Size: 0.5mm
Suitable Substrates: Sound, previously painted surfaces in preparation for coating using Keim Mineral Paints
Application Method: Brush or roller
Theoretical Coverage: 0.4kg/m2 KEIM Contact Plus
Wet Film Thickness (WFT): -
Dry Film Thickness (DFT): -
Induction Time: -
Pot Life: -
Touch Dry: -
Overcoatable: Allow at least 12 hours drying time between individual coats
Fully Cured: -
Cleaner / Thinner: Clean tools with water immediately after use
Shelf Life: Approx 12 months if kept dry, cool, but frost free in tightly closed containers. Protect from moisture.
Packaging: Available in 5kg & 25kg

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use