A solvent based HEAVY DUTY road line striping paint. Ideal for roads, runways and more.
Available in 5 Litres
3. Select a Qty
As low as:
£48.67
Inc VAT£58.40
As low as:
Inc VAT
PRODUCT DETAILS
Centrecoat SPE Single Pack Epoxy Road Line Paint is a single pack Heavy Duty road line paint, chemical and fuel resistance with a slip resistant finish for roads, airport runways etc.
Centrecoat SPE Single Pack Epoxy Road Line Paint is a single pack product designed for marking road lines. It has been specially manufactured to precision, offering abrasion resistance, chemical and fuel resistance with an anti slip finish.
Best Uses
Centrecoat SPE Single Pack Epoxy Road Line Paint can be applied to most road surfaces and is available in yellow, black and white for producing a matt finish. Centrecoat Epoxy Line Paint offers excellent hard wearing characteristics with an anti skid finish.
Application
Centrecoat SPE Single Pack Epoxy Road Line Paint can be applied using roller or brush, but is highly recommended for use with Spray Line Marking Machines for a more accurate, pleasing result. Centrecoat Single Pack Epoxy Road Line Paint offers a theoretical coverage rate of approximately a 48 metre line at 75mm wide.
Surface and Environment
Centrecoat Epoxy Line Paint can be applied to most common road surfaces such as tarmac and asphalt as well as concrete, wood, brick and paving found in car parks, aerodromes, factories, roads, airports, carriageways, car parking spaces, cycle lanes, sports facilities and playgrounds.
TECHNICAL
Features
Offers a fast drying time and can be applied to most road surfaces also concrete, wood, brick and paving
Good wear and anti-skid characteristics
Ideal for car parks, aerodromes, factories, roads, airports and sports facilities and playgrounds
Technical Info
Components:
Single Pack
Type:
Epoxy
Finish:
Matt
Stock Colours:
Black, White and Yellow
Tintable:
No
VOC Content:
Volume Solids:
52%
Suitable Substrates:
Suitable substrates include roads, car parks (concrete or tarmac / weathered blacktop), airfield runways etc. Typical other substrates that accept application are brick, paving, factory floor demarcations and wood.
Application Method:
Apply by lining machine, airless spray, conventional spray, brush or roller.
Navigating through the elements of the carousel is possible using the tab key. You can skip the carousel or go straight to carousel navigation using the skip links.
Press to skip carousel
