Centrecoat WB Cladding Paint

SKU
ID24704
UN3082 (Class: 9, Pk Grp: III)
An anti corrosive, water based quick drying cladding paint for Plastisol, wood, aluminium etc.
Available in 5 Litres. Tintable to over 30,000 colours.
From £87.86 £73.22
In stock
Only %1 left
Product Description

Centrecoat WB Cladding Paint is a high quality, anti-corrosive water based cladding paint, fast drying and holds a good wet edge. Ideally suited for Plastisol Industrial units, wooden cladding, carbon steel, modular building and containers.

Best Uses

Centrecoat WB Cladding Paint is a high quality anti corrosive water based sheen finish that has shown proven adhesion to a wide variety of difficult to paint substrates. This water based external cladding paint is ideal for use on Plastisol, modular buildings with cladding that requires coloured protection against the elements.

  • Tintable to most BS4800 and RAL Colours
  • Waterborne coating with proven adhesion to a wide range of substrates
  • Non-toxic environmentally friendly coating
  • Fast drying
  • Excellent coverage
  • Rust stabilising

Suitable substrates include carbon steel, galvanised steel (new and weathered), aluminium (including untreated), Plastisol sheeting, pre-painted surfaces, glass, ceramic tiles, wood, GRP and certain rigid plastics.

Picture courtsey of MJJM Industrial Painting Contractors.

Application

Can be applied by a variety of application methods including airless spray or air assisted airless spray (13-15 thou tip). Dry to handle after 30 minutes at 20°C. Full cured after 7 days at 20°C.

Technical Details
Components: Single Pack
Type: Water-based acrylic zic phosphate
Finish: Sheen
Stock Colours: Just tints
Tintable: Yes, to most RAL or British Standard codes on request. Please note, bespoke tints are non refundable / exchangeable
VOC Content: 60 g/l
Volume Solids: Approx 45%
Suitable Substrates: Steel, cladding
Application Method: Brush, Roller, Airless Spray
Theoretical Coverage:

Approx. 8 - 10 square metres per litre

Wet Film Thickness (WFT): 100 microns/coat
Dry Film Thickness (DFT): 45 microns per/coat
Induction Time: -
Pot Life: -
Touch Dry: 30 minutes at 20°C
Dry To Handle: 2 hours at 20°C
Fully Cured: 7 days at 20°C
Cleaner / Thinner: Water
Shelf Life: See container
Packaging: Available in 5 Litres
Product Data Sheet (153.11 kB)
Safety Data Sheet (1,558.80 kB)

Related Products