Mapei UltraCare Keranet Easy Spray
Mapei UltraCare Keranet Easy Spray removes surface residues of cement, lime and efflorescence. It can be used immediately after grouting and is also suitable for cleaning the back side of porcelain tiles prior to installation.
Best Uses
UltraCare Keranet Easy is used for cleaning internal and external surfaces that have been grouted using cementitious grouts. It can be used on all acid-resistant materials, such as porcelain, ceramic, glass mosaics, quarry tiles, terracotta and acid-resistant natural stone. UltraCare Keranet Easy Spray will not damage the grout joint, even when using coloured grouts.
- Simple and ready to use, does not require any dilution
- Perfect for removing fresh cementitious grout residues when installing large format tiles
- Suitable for cleaning the back side of tiles prior to installation
- When used correctly it will not damage the grout joint, even when using coloured grout
- May also be used on cured grouts with light residues.
Application
When useing immediately after cementitious grouts, wait until it loses its plasticity and becomes opaque (the time required will depend on the type of grouting product used). Next, spray UltraCare Keranet Easy evenly on the surface to be cleaned. Leave this to react for 1-2 minutes and then proceed with a first cleaning using a moist cellulose sponge (MAPEI sponge type) working diagonally over the grout joints. You should ensure you rinse the sponge frequently. We recommend using two different containers of water. The first container is to remove the excess grout from the sponge, and the second should be used for rinsing the sponge.
On light cured grout residues, spray UltraCare Keranet Easy evenly over the entire area at a suitable distance. Work in manageable areas, allowing the spray to act for a few minutes. Finally wipe over the surface removing it with the use of a moist cellulose sponge as described above.
UltraCare Keranet Easy may also be used on cured grouts with light residues.
Cautions
- Never use UltraCare Keranet Easy on marble or calcareous stone
- Do not use UltraCare Keranet Easy on ceramic tiles or enamelled baths with non-acid-resistant enamel
- Use UltraCare Keranet Easy with rubber gloves and glasses
- Always use UltraCare Keranet in compliance with the indications of the specific technical data sheet
Technical Info
| Components: | Single Pack |
| Type: | Liquid acid cleaner |
| Finish: | - |
| Stock Colours: | Transparent |
| Tintable: | No |
| VOC Content: | - |
| Volume Solids: | - |
| Suitable Substrates: | Acid-resistant materials, such as porcelain, ceramic, glass mosaics, quarry tiles, terracotta and acid-resistant natural stone. |
| Application Method: | Sponge |
| Theoretical Coverage: | Depending on the needs, it can vary based on the degree and type of dirt and the surface to be treated |
| Wet Film Thickness (WFT): | - |
| Dry Film Thickness (DFT): | - |
| Waiting Time: | 5 minutes before rinsing |
| Application Temperature: | 0°C to +40°C |
| Touch Dry: | - |
| Overcoatable: | - |
| Fully Cured: | - |
| Cleaner / Thinner: | Clean sponge with water |
| Shelf Life: | 24 months from date of production unopened |
| Packaging: | Available in packs of 6 x 0.75 litres |
