Mapei UltraCare Kerapoxy Cleaner

Name: Mapei UltraCare Kerapoxy Cleaner
Brand: Mapei
SKU: ID23806
Price: 102.25 GBP
Availability: InStock

SKU

ID23806

Non Hazardous

A ready to use special cleaning product to remove epoxy residues after grouting.

Available in 6 x 0.75 Litre packs and 5 Litres

From £102.25 £85.21

In stock

Only %1 left

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Product Details

Product Description

Mapei UltraCare Kerapoxy Cleaner is a simple, ready to use product that easily removes traces of epoxy grout from porcelain, glazed ceramic, glass mosaics and nonabsorbent surfaces without giving off hazardous fumes. It can be used immediately after grouting as well as being able to remove cured residues.

Best Uses

UltraCare Kerapoxy Cleaner can be used for fresh cleaning operations and also for after completing laying work to remove traces and stains of epoxy residues. It will remove traces and marks of all epoxy grouts.

Easily removes traces of epoxy grout from porcelain, glazed ceramic, glass mosaics and nonabsorbent surfaces.
Ready to use product, no dilution is required.
It can be used immediately after grouting as well as being able to remove cured residues.
It is also suitable for cleaning the tools used to apply epoxy grouts.
Remove residues, stains and marks of epoxy grout without giving off hazardous fumes.
Does not damage either the coating surface or grouted joints when used correctly.

Easily remove traces of epoxy grout from porcelain, glazed ceramic, glass mosaics and nonabsorbent surfaces. UltraCare Kerapoxy Cleaner is a ready to use product, so there is no dilution required. It can be used immediately after grouting, as well as being able to remove cured residues. It is also suitable for cleaning the tools used to apply epoxy grouts.

Application

UltraCare Kerapoxy Cleaner is diluted and ready to use. It should be applied directly onto the surface to be cleaned or onto the traces of grout residue, and then left for a few minutes. After a few minutes work over the surface with a Scotch-Brite® pad. Remove the solution and then rinse thoroughly with clean water.

The product is particularly efficient on fresh grout. If cleaning is carried out a few hours after applying the grout, it may be necessary to leave it standing for longer (at least 15 - 20 minutes) or you may need to repeat the cycle.

For residues that have cured on the surface over time, or if residues persists, then use UltraCare Epoxy Off Gel. Please refer to the relative techincal data sheet for the application method. For applications on flooring it is possible to carry out cleaning with a single disc cleaning machine.

Technical

Technical Details

Cautions

Do not use on polished marble or stone.
Do not use on wood.
Do not use on methacrylate baths.
Before using UltraCare Kerapoxy Cleaner on materials with an unknown surface resistance, test the product beforehand to make sure it does not damage the surface.
Before using the product, protect all surfaces which could be damaged in direct contact with the product.

Technical Info

Components:	Single Pack
Type:	Concentrated liquid detergent
Finish:	-
Stock Colours:	Opalescent
Tintable:	No
VOC Content:	-
Volume Solids:	-
Suitable Substrates:	Porcelain, glazed ceramic, glass mosaics and non-absorbent surfaces
Application Method:	See Technical Data Sheet
Theoretical Coverage:	Depending on the needs, it can vary based on the degree and type of dirt and the surface to be treated.
Wet Film Thickness (WFT):	-
Dry Film Thickness (DFT):	-
Waiting Time:	5 minutes before rinsing
Application Temperature:	0°C to +40°C
Cleaner / Thinner:	Rinse with clean water
Shelf Life:	24 months from date of production unopened
Packaging:	Available in 6 x 0.75 Litres and 5 Litres