Mapei UltraCare Keranet
Mapei UltraCare Keranet is an acid-based concentrated cleaning product in liquid form. It is very effective at removing cementitious residues from porcelain, ceramic and all acid-resistant materials. Ideal for cleaning operations after completing laying work, for removing salt and limescale efflorescence and rust stains.
Best Uses
UltraCare Keranet is ideal for cleaning internal or external surfaces (including façades) that have been grouted using cementitious grouts. The liquid removes concrete stains and residues of installation and grouting operations, whilst still respecting the cement grout joint. Suitable for use on acid-resistant materials such as porcelain, ceramic, glass mosaics, quarry tiles, terracotta and acid-resistant natural stone. It easily removes installation, cementitious grout and adhesive residues from the installed material, leaving a perfectly clean surface.
Application
Ensure the surfaces to be cleaned are acid-resistant. It is always advisable to carry out preliminary tests before cleaning with UltraCare Keranet. Always make sure surrounding areas are covered to avoid damage from splashes.
All surfaces being cleaned should be well moistened with water before treatment with UltraCare Keranet. This is especially important for very absorbent surfaces such as Tuscan
terracotta, porous ceramics, natural stone etc.)
Apply the product, diluted in water according to the level of residue on the surface (1 : 10 or 1 : 5) and the type of surface to be treated, working in manageable areas and leave to act for about 5 minutes. Then work over the surface with a single disc cleaning machine or an emulsifying pad. Remove the solution and then rinse with plenty of clean water. For heavy residues, you may need to repeat the above procedure.
Only use UltraCare Keranet on completely cured grout (from 1 to 10 days, depending on the type of cement grouting used). In case you need to use a grout residue remover at the point of installation, then we advise that you use UltraCare Keranet Easy, which is suitable for excess grout removal from the surface, at the point of application. Please refer to the specific data sheet.
Cautions
- Never use UltraCare Keranet on polished marble or calcareous stone in general, limestone-based materials or cementitious terrazzo tiles.
- Do not use UltraCare Keranet on ceramic tiles or enamelled baths with non-acid-resistant enamel.
- Use UltraCare Keranet with rubber gloves and glasses, paying attention to splashes on the skin or clothes.
- Make sure before use that the surfaces to be cleaned are acid-resistant. It is advisable, in doubtful cases, to carry out preliminary tests at different concentration rates.
- Do not leave UltraCare Keranet on grout joints too long, and always rinse thoroughly with clean water to remove any product residue that may over time cause colour variations.
- UltraCare Keranet does not damage metal or galvanized surfaces; however, given the variety of materials available on the market, a preliminary test at different concentrations is always recommended.
Technical Info
| Components: | Single Pack |
| Type: | Acid-Based |
| Finish: | - |
| Stock Colours: | Transparent |
| Tintable: | No |
| VOC Content: | - |
| Volume Solids: | - |
| Suitable Substrates: |
Acid-resistant materials such as porcelain, ceramic, glass mosaics, quarry tiles, terracotta and acid-resistant natural stone |
| Application Method: | Damp sponge, wet vac, single disc cleaning machine |
| Theoretical Coverage: | Depending on the needs, it can vary based on dilution, the degree and type of dirt and the surface to be treated. |
| Wet Film Thickness (WFT): | - |
| Dry Film Thickness (DFT): | - |
| Waiting Time: | 5 minutes before rinsing |
| Application Temperature: | 0°C to +40°C |
| Cleaner / Thinner: | Rinse with clean water |
| Shelf Life: | 24 months from date of production unopened |
| Packaging: | Available in 1 Litre (packs of 10) and 5 Litres |
