Mapei UltraCare Multicleaner
Mapei UltraCare Multicleaner is a concentrated everyday cleaner. Its special formula guarantees a high level of cleanliness whilst respecting the surfaces on which it is used. It is suitable for use on all washable surfaces, even the most delicate, thanks to the neutral pH.
Best Uses
When used in different dilutions Mapei UltraCare Multicleaner is suitable for gently cleaning surfaces such as porcelain and ceramic tiles, stone and concrete, in an efficient and delicate way. It is suitable for use on the following surfaces:
- Porcelain and ceramic tiles
- Concrete flooring
- Parquet with oil or paint finish
- Terrazzo and terracotta
- Marble, granite and all natural stone, perfect for use on polished natural stone that is sensitive to aggressive detergents
- Quartz and marble agglomerates
- Flooring in LVT, linoleum, rubber and PVC.
Used regularly, Mapei UltraCare Multicleaner keeps colours vivid and retains the appearance of the surfaces on which it is used.
Application
Dilute UltraCare Multicleaner with water in ratio from 1:20 to 1:200 depending on the degree of concentration required and the level of dirt to be removed. UltraCare Multicleaner can be used diluted 1:30 to undertake the initial clean after installation on delicate surfaces.
For routine maintenance, dilute UltraCare Multicleaner 1:200 (50 ml of product in 10 litres of water). In this dilution, it is not necessary to rinse the treated surfaces.
For extraordinary maintenance or more resistant dirt, use the product at higher concentrations, up to 1:20 (500 ml of product in 10 litres of water). At these dilutions, it is necessary to rinse the surfaces with water.
Important Notes
- Never use UltraCare Multicleaner on waxed surfaces. In case of doubt, carry out a preliminary test in an inconspicuous area.
- Do not use UltraCare Multicleaner undiluted.
- When using UltraCare Multicleaner we advise to wear rubber gloves.
- Use on methacrylate baths only when diluted.
- UltraCare Multicleaner does not damage metal or galvanized surfaces; however, given the variety of materials available on the market, a preliminary test at different concentrations is always recommended.
Technical Info
| Components: | Single pack |
| Type: | Concentrated cleaner |
| Finish: | - |
| Stock Colours: | Transparent |
| Tintable: | No |
| VOC Content: | - |
| Volume Solids: | - |
| Suitable Substrates: | Porcelain and ceramic tiles, concrete flooring, parquet with oil or paint finish, terrazzo and terracotta, marble, granite and all natural stone, quartz and marble agglomerates, flooring in LVT, linoleum, rubber and PVC. |
| Application Method: | Floor Cleaning Machine |
| Theoretical Coverage: |
Diluted in a ratio of 1:200 with water it is possible to clean approximately Consumption may vary based on dilution, the degree and type of dirt and the surface to be treated. |
| Wet Film Thickness (WFT): | - |
| Dry Film Thickness (DFT): | - |
| Waiting Time: | 5 minutes before rinsing |
| Temperature Range: | 0°C to +40°C |
| Cleaner / Thinner: | Rinse surfaces with water |
| Shelf Life: | 24 months from date of production unopened |
| Packaging: | Available in 1 Litre (Sold in packs of 10) and 5 Litres |
