£7.75 delivery on orders excluding certain products & postcodes *
Teamac P101 Polyurethane Hull Paint is a 2 pack polyurethane paint for Boats and Boat Hulls, a high gloss light stable aliphatic polyurethane which will not fade or yellow when exposed to high levels of ultraviolet light. Teamac P101 Polyurethane Hull Paint is part of Promain's extensive range of Marine Gloss Paints that can provide boats and boat hulls with a decorative, protective finish. Once applied, Teamac P101 Polyurethane Hull Paint can be easily cleaned of surface contaminants.
P101 Polyurethane Hull Paint is ideally suited for use in the marine environment, where boats need to remain aesthetically pleasing on the eye and the growth of fungi and algae needs to be destroyed. Teamac P101 Polyurethane Hull Paint will not allow fungus to grow and will work to prevent barnacles attaching themselves to the hulls of the boat also.
Prior to application all surfaces should be laitance free, clean, dry, sound and free from contaminants.
The product is supplied in two containers: one larger container which is labelled 'Base' and a smaller container labelled 'Hardener'. The contents of the pack marked 'Hardener' are added to the contents of the larger pack marked 'Base'. These should be thoroughly mixed together, preferably by slow speed electric mixer, for 2 minutes or until thoroughly mixed. Failure to mix the material correctly will lead to uncured areas in the coating.
Apply between 5 to 30°C by brush or short nap mohair roller.
P101 Polyurethane Hull Paint has been specifically designed for the outdoor environment in different aspects of the marine world and works well to protect surfaces against the effects of UV light whilst remaining waterproof. Use Teamac P101 Polyurethane Hull Paint Marine Gloss on GRP, Wood, Ferro Concrete and suitable primed metals.
IMPORTANT NOTICE: From 24th August 2023, adequate training is required before industrial or professional use of this product. Training can be accessed at: https://www.safeusediisocyanates.eu
Components: | Two Pack |
Type: | Polyurethane Coating |
Finish: | Gloss |
Stock Colours: | Arctic Blue, Cypress Green, Golden Yellow, Oxford Blue, PO Red, Regency Cream |
Tintable: | Yes. Please note, bespoke tints are non refundable / exchangeable |
VOC Content: | 498 g/litre |
Volume Solids: | 47% |
Suitable Substrates: | GRP, Metal (primed), Wood, Ferro Concrete |
Application Method: | Brush, Roller, Airless Spray |
Theoretical Coverage: | 7 Square Metres Per Litre |
Wet Film Thickness (WFT): | 120 to 135 microns |
Dry Film Thickness (DFT): | 55 to 65 microns |
Induction Time: | - |
Pot Life: | 6 to 8 hours at 20°C |
Initial Cure: | 3 to 4 hours at 20°C |
Hard Dry: | 16 to 24 hours at 20°C |
Fully Cured: | 5 to 7 days at 20°C |
Cleaner / Thinner: | Do not Thin. Clean tools with Anti Graffiti Brushwash |
Shelf Life: | - |
Packaging: | Available in 1 and 5 Litres |