NORSOK Approved Paints

Hempel Hempadur 15570
Two component polyamide-adduct epoxy paint providing a protective coating to steel & metal surfaces in severely corrosive environments.

From £50.95 £42.46
Hempel Hempathane HS 55610
A 2-part, polyurethane topcoat, with good gloss and colour retention. BBA Cert No. 08/H135-PS13. Highways Approved Item No.169.

From £76.32 £63.60
Hempel Hempadur Mastic 45880
A self-primed, surface tolerant coating with low temperature curing properties, low VOC and high film build.

From £63.74 £53.12
*Hempel Polyester GF 35920
This product is now discontinued. See Hempel Hempaline Defend 630 as a potential alternative.

In stock
Hempel Pro Acrylic 55883 QD
Suitable for use as a finishing coat for protection of structural steel.

From £105.22 £87.68
*Hempel Hempadur Quattro XO 17770
This product is now discontinued. See PPG Sigmacover 350 as a potential alternative.

In stock
Hempel Hempathane Topcoat 55210
A two-component, glossy acrylic polyurethane coating for use onto structural steel in severely corrosive environments.

From £73.66 £61.38

System 1 (pre-qualified)	Carbon steel with maximum operating temperature < 120°C (248°F) Structural steel Exteriors of equipment, vessels, piping and valves (not insulated)
System 2	Carbon steel surfaces exposed to operating temperatures > 120°C (248°F)
System 3A-3G (System 3B pre-qualified)	Internal surface of carbon steel tanks
System 4 (pre-qualified)	Walkways, escape routes and lay down areas
System 5A (pre-qualified)	Epoxy-based fire protection
System 5B (pre-qualified)	Cement-based fire protection
System 6A	Uninsulated stainless steel when painting is required. Aluminum when painting is required
System 6B	Hot-dipped, galvanized steel when painting is required
System 6C	Insulated stainless steel piping and vessels at temperatures < 150°C (302°F)
System 7A (pre-qualified)	Carbon and stainless steel in the splash zone
System 7B (pre-qualified)	Submerged carbon and stainless steel ≤ 50°C (122°F)
System 7C (pre-qualified)	Submerged carbon and stainless steel > 50°C (122°F)
System 8a	Structural carbon steel with maximum operating temperature ≤ 80°C (176°F) in internal and fully dry and ventilated areas
System 8b	Structural carbon steel with maximum operating temperature ≤ 80°C (176°F) in fully dry and ventilated areas
System 9	Bulk-supplied carbon steel valves with maximum operating temperature up to 150°C (302°F)