NORSOK Approved Paints

International Non Slip Aggregate - GMA131, GPA900, GMA132
Designed for use within certain International Paints to provide a safe anti slip finish to walkways.

From £8.35 £6.96
Hempel Hempathane Topcoat 55210
A two-component, glossy acrylic polyurethane coating for use onto structural steel in severely corrosive environments.

From £73.66 £61.38
Hempel Hempadur 15570
Two component polyamide-adduct epoxy paint providing a protective coating to steel & metal surfaces in severely corrosive environments.

From £50.95 £42.46
Sherwin Williams Acrolon 7300 Acrylic Finish
A high solids, tin free, PU with fast drying and high gloss attributes for use where long term exterior gloss and colour retention is required.

From £115.68 £96.40
Jotun Hardtop XP
A hard wearing top coat for use in aggressive atmospheric exposure. Network Rail approved. Highways Approved Item No 168

From £87.22 £72.68
PPG SigmaDur 550 H
Formally PPG SigmaDur 568. A 2 Part High Solids, High Build Polyurethane Gloss Finish.

From £69.60 £58.00
PPG SigmaDur 550
Formerly Amercoat 450E, Amercoat 450S. A two pack PU Gloss Finish for steel. Item No.168. M24(XM92).

From £80.16 £66.80

System 1 (pre-qualified)	Carbon steel with maximum operating temperature < 120°C (248°F) Structural steel Exteriors of equipment, vessels, piping and valves (not insulated)
System 2	Carbon steel surfaces exposed to operating temperatures > 120°C (248°F)
System 3A-3G (System 3B pre-qualified)	Internal surface of carbon steel tanks
System 4 (pre-qualified)	Walkways, escape routes and lay down areas
System 5A (pre-qualified)	Epoxy-based fire protection
System 5B (pre-qualified)	Cement-based fire protection
System 6A	Uninsulated stainless steel when painting is required. Aluminum when painting is required
System 6B	Hot-dipped, galvanized steel when painting is required
System 6C	Insulated stainless steel piping and vessels at temperatures < 150°C (302°F)
System 7A (pre-qualified)	Carbon and stainless steel in the splash zone
System 7B (pre-qualified)	Submerged carbon and stainless steel ≤ 50°C (122°F)
System 7C (pre-qualified)	Submerged carbon and stainless steel > 50°C (122°F)
System 8a	Structural carbon steel with maximum operating temperature ≤ 80°C (176°F) in internal and fully dry and ventilated areas
System 8b	Structural carbon steel with maximum operating temperature ≤ 80°C (176°F) in fully dry and ventilated areas
System 9	Bulk-supplied carbon steel valves with maximum operating temperature up to 150°C (302°F)