NORSOK Approved Paints

Hempel Hempadur 4774D
A self-priming, two-component, high-build, pure epoxy paint.

From £287.09 £239.24
Sherwin Williams Epidek M339 - Formerly Leighs
A 3 pack epoxy high build anti slip deck coating, approved for MoD. UK MoD/DRA (Ministry of Defence) to DEF STAN 80 -134.

From £283.94 £236.62
Jotun Barrier 80
A fast drying, anti corrosive, high solids 2 part polyamide cured zinc rich epoxy coating.

£285.77 £238.14
Hempel Hempadur AvantGuard 750
A versatile primer for long-term protection of steel in severely corrosive environments.

£280.97 £234.14

System 1 (pre-qualified)	Carbon steel with maximum operating temperature < 120°C (248°F) Structural steel Exteriors of equipment, vessels, piping and valves (not insulated)
System 2	Carbon steel surfaces exposed to operating temperatures > 120°C (248°F)
System 3A-3G (System 3B pre-qualified)	Internal surface of carbon steel tanks
System 4 (pre-qualified)	Walkways, escape routes and lay down areas
System 5A (pre-qualified)	Epoxy-based fire protection
System 5B (pre-qualified)	Cement-based fire protection
System 6A	Uninsulated stainless steel when painting is required. Aluminum when painting is required
System 6B	Hot-dipped, galvanized steel when painting is required
System 6C	Insulated stainless steel piping and vessels at temperatures < 150°C (302°F)
System 7A (pre-qualified)	Carbon and stainless steel in the splash zone
System 7B (pre-qualified)	Submerged carbon and stainless steel ≤ 50°C (122°F)
System 7C (pre-qualified)	Submerged carbon and stainless steel > 50°C (122°F)
System 8a	Structural carbon steel with maximum operating temperature ≤ 80°C (176°F) in internal and fully dry and ventilated areas
System 8b	Structural carbon steel with maximum operating temperature ≤ 80°C (176°F) in fully dry and ventilated areas
System 9	Bulk-supplied carbon steel valves with maximum operating temperature up to 150°C (302°F)