Sherwin Williams Epidek M339 - Formerly Leighs

Part A and B: UN1263 (Class: 3, Pk Grp: III)
A 3 pack epoxy high build anti slip deck coating, approved for MoD. UK MoD/DRA (Ministry of Defence) to DEF STAN 80 -134.
Available in 10 Litres
From £225.60 £188.00
In stock
Only %1 left
Product Description

Sherwin Williams Epidek M339 is a 3 pack epoxy high build anti slip deck coating, with excellent abrasion and weathering resistance approved for British Ministry of Defence applications such as helidecks.

Best Uses

Sherwin Williams Epidek M339 is a high profile anti slip deck paint suitable for steel and aluminium walkways, flight decks escape routes, helidecks and lay down areas.


Formulated for spray application using recommended spray guns such as Sagola 429/N Hopper Gun with a 6mm tip, or via air agitated pressure pot systems - see data sheet for further information. Epidek M339 should be applied at temperatures in excess of 10°C. In conditions of high humidity, good ventilation is required especially if humidity is over 80%.

Use appropriate primer depending on substrate - see technical tab and data sheets. If required Macropoxy M262 may be used for markings as it is available in a full range of colours.

Technical Details


  • Approved to UK MoD/DRA (Ministry of Defence) to DEF STAN 80 -134 Type 2: Rough Texture
  • Norsok M-501 System 4 (Pre Qualified)

Recommended Primers For Steel:

Recommended Primers For Aluminium:

Technical Info

  • Approved to BS476 Part 7 - Surface Spread of Flame
  • Application Temperature: Minimum of 10°C
Components: Three Pack
Type: Epoxy High Build
Finish: -
Stock Colours: 00-A-05, 14-C-39, Black
Tintable: Limited Range. Please note, bespoke tints are non refundable / exchangeable
VOC Content: 250 gms/litre
Volume Solids: 71 ± 4%
Suitable Substrates: Steel, Aluminium, 
Application Method: Spray
Theoretical Coverage: 1.8m2 per litre for single coat specifications or 3.6m2 per litre for two coat specifications
Wet Film Thickness (WFT): Single Coat Spec: 563 microns, Two Coat Spec: 282 microns
Dry Film Thickness (DFT): Single Coat Spec: 400 microns, Two Coat Spec: 200 microns
Induction Time: -
Pot Life: 6 hours at 15°C
Touch Dry: 6 hours at 15°C
Overcoatable: 6 hours at 15°C
Dry to handle: 24 hours at 15°C
Cleaner / Thinner: Thinner no.5
Shelf Life: 18 months from date of production unopened or 'Use By' date where specified
Packaging: Available in 10 Litres

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Related Products