Osmo Polyx Oil Anti Slip - 3089 Clear Satin (R11 Rating)

Non Hazardous
Suitable for internal flooring where a stronger slip resistance is required, e.g. sloped surfaces or ramps.
Available in 750ml and 2.5 Litres
From £31.58 £26.32
In stock
Only %1 left
Product Description

Osmo Polyx®-OIL Anti Slip Extra (R11) 3089 is a clear wood finish for indoor wooden flooring where a higher slip resistance is required. An R11 slip rating is an even stronger resistance against slipping, meaning it can also be used on sloped surfaces or ramps.

Best Uses

Osmo Polyx-Oil Anti Slip Extra (R11) 3089 is ideal for the protection of all wooden floors for which higher slip resistance is required (commercial/public interiors), such as solid wood, plank, strip, OSB and cork flooring. Polyx®-Oil Anti-Slip Extra (3089) is distinguished by its extremely high surface grip. Special additives provide the dried coating a structure that enables a slip resistance class R11.


Wood surface must be clean, dry and frost-free (moisture content max. 18%). Osmo Polyx®-Oil Anti-Slip is ready to use and does not require thinning. Always stir the product well before use. Clean old microporous stains thoroughly, and ensure any old paints and lacquers are completely removed. As a general rule, wear a dust mask during sanding works. Use Osmo Wood Filler to fill small cracks, larger joints or holes in the wood.

Sand wood surfaces carefully. Begin with coarse sandpaper – final sanding work for flooring P120-150. Before oiling the surface, remove sanding dust with a broom or vacuum cleaner. The finished surface is influenced by several factors, including the condition of the wood. Therefore, we always recommend a trial application first, especially for unfamiliar surfaces.

Application can be by either Osmo Flat Brush, Floor Brush or Microfibre Roller, apply thinly along the wood grain and spread well.
Allow to dry for approx. 8-10 hours under good ventilation. After drying, quickly apply a second coat also thinly. For renovation works on previously oiled surfaces, one coat applied to the clean and dry surface is usually sufficient. Note: Osmo Polyx®-Oil Anti-Slip cannot be evened out with a single disc machine.

Technical Details


  • Slip resistance for added safety
  • Especially for public and commercial use
  • Extremely durable and hard wearing
  • Very water and dirt resistant
  • Resistant to common liquid spillages such as water, juice, tea, cola and wine
  • Saliva-resistant and sweat proof, suitable for children's toys
  • Microporous, breathable finish which does not crack, peel or flake
  • No sanding necessary for spot repairs or future applications

Technical Info

Components: Single Pack
Type: Based on natural plant oils and waxes
Finish: Satin 3089
Stock Colours: Clear
Tintable: No.
VOC Content: 500 g/l
Volume Solids: -
Suitable Substrates: Solid Wood, Plank, Strip, OSB and Cork Flooring
Application Method: Floor Brush, Flat Brush or Microfibre Roller
Theoretical Coverage: 1 litre covers approx. 24 m² with one coat
Wet Film Thickness (WFT): -
Dry Film Thickness (DFT): -
Induction Time: -
Pot Life: -
Touch Dry: Approx 8-10 hours at 23°C
Overcoatable: -
Fully Cured: After 2-3 weeks at 23°C
Cleaner / Thinner: Osmo Brush Cleaner
Shelf Life: Up to 5 years and longer if can is kept dry and closed tightly. 
Packaging: Available in 750ml and 2.5 Litres

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Related Products