PPG Nu-Klad SL

Part A: UN3082 (Class: 9, Pk Grp: III), Part B: UN3066 (Class: 8, Pk Grp: II), Filler: Non Hazardous
A 3 pack, solvent free, self leveling epoxy floor coating. For industrial areas with heavy traffic on concrete.
Available in 15.24 Litres
From £404.16 £336.80
In stock
Only %1 left
Product Description

PPG Nu-Klad SL is a three component, solvent free, self levelling epoxy floor coating suitable for industrial areas with heavy traffic on concrete.

Best Uses

PPG Nu-Klad SL is best suited for infrastructure or industrial areas with heavy traffic as it has excellent resistance against hot tires and abrasion. Suitable for use with anti skid.

  • Self levelling
  • Suitable for industrial areas with heavy traffic
  • Excellent abrasion resistance
  • Excellent resistance against hot tires
  • Suitable for use with anti skid


If applying to primed concrete the primer must be dry and free from contamination. For coated concrete that are sound ensure the substrate is sufficiently roughened, dry and cleaned. To ensure compatibility, rub the existing coating with a cloth with Xylene or MEK for 10 seconds and remove existing coatings if dissolving occurs.

Technical Details
Components: Three Part
Type: Solvent Free Self Leveling Epoxy
Finish: Gloss
Stock Colours: Depends on demand
Tintable: Yes. Contact us to check shades. Please note, bespoke tints are non refundable / exchangeable
VOC Content: 0.0g per Litre
Volume Solids: 100%
Suitable Substrates: For concrete
Application Method: Trowel, Swedish Knife
Theoretical Coverage: Approx 3.3 Kg per m2 for 2000 microns
Wet Film Thickness (WFT):  
Dry Film Thickness (DFT): 2000 microns
Induction Time: None
Pot Life: 25 minutes at 20°C
Touch Dry: 24 hours at 20°C
Overcoatable: Between 24 hours and 7 days at 20°C
Fully Cured: 7 days at 20°C
Cleaner / Thinner: Do not thin. Clean up with PPG Thinner 90-53
Shelf Life: Base and Hardener 12 months, Filler 36 months when stored cool and dry
Packaging: Available in 15.24 Litres

Related Products