Rust-Oleum 5190 Epoxy Repair Mortar Deep Fill
Rustoleum 5190 Epoxy Repair Mortar is virtually indestructible and ideal for repairs to factory floors, driveways, worn and broken steps, garage floors, sills, and grouting in bolts and railings etc.
Best Uses
Rustoleum 5190 Epoxy Repair Mortar Deep Fill for Floors is best used for providing cracks and holes with a fixing system that provides a fantastic bond to most surfaces, preferably concrete. Rustoleum 5190 Epoxy Repair Mortar Deep Fill provides users with an easily trowelled grey mortar that offers a smooth, impervious surface.
- Economical repair of deep or large holes in concrete floors
- Does not shrink or crack
- Easy all-in-1 packaging
- For interior and exterior use
- Contains no solvents
Application
SURFACE PREPARATION
Concrete surfaces should be dry and free from previous coatings, contaminants and loose material and at least four weeks old. Very smooth concrete or concrete with soft laitance should be abraded to provide a physical profile. Grease or oil should be removed with ND14 and the area thoroughly washed off and allowed to become completely dry.
DIRECTIONS FOR USE
The pack contains a granular resinous material and one bottle of curing agent. Mix the granular resinous material with the curing agent on a board. It is important that mixing should be carried out very thoroughly. The ratio of resin to curing agent is critical and the mixing of part packs is not recommended.
APPLICATION CONDITIONS
Temperature of material, air and substrate between 10 and 35°C and relative humidity below 85%. The substrate temperature must be at least 3°C above dew point.
APPLICATION & THINNING: RAKE/TROWEL
The mortar should be trowelled firmly against the substrate. It should be overlaid with Epoxy Repair Mortar 5180 in very heavy wear areas or where the thickness of the repair is less than 15 mm. The Deep Fill mortar has a textured surface and should be overlaid with Epoxy Repair Mortar 5180 if a smoother surface is required. The working life of the mixed product is half to one hour, depending on temperature. If the product is used past its working life, trowelling will become difficult and adhesion reduced.
Surface/Environment
Rustoleum 5190 Epoxy Repair Mortar is virtually indestructible and ideal for repairs to factory floors, driveways, worn and broken steps, garage floors, sills, and grouting in bolts and railings etc.
Rustoleum 5190 Epoxy Repair Mortar is part of a wide range of Rust-Oleum Products available from Promain.
Notes
- Rustoleum 5190 Epoxy Repair Mortar Deep Fill can be applied to floors at 15mm - 100mm thick in one layer
- Formally Anglo Epoxy Repair Mortar
Technical Info
| Components: | Two Part |
| Type: | Very strong epoxy repair mortar |
| Finish: | - |
| Stock Colours: | Grey |
| Tintable: | No |
| VOC Content: | 0.0g per Litre |
| Volume Solids: | 82% |
| Suitable Substrates: | For economical repair of deep holes of 15 – 100 mm in concrete |
| Application Method: | Trowel |
| Theoretical Coverage: | 0.5 m2 per 25 Kg at 3cm depth |
| Wet Film Thickness (WFT): | 15 - 100 mm |
| Dry Film Thickness (DFT): | 15 - 100 mm |
| Induction Time: | - |
| Pot Life: | 30 minutes at 20°C |
| Touch Dry: | - |
| Overcoatable: | Between 6 - 12 hours at 20°C |
| Fully Cured: | 12 hours at 20°C |
| Cleaner / Thinner: | Rustoleum Thinner 160 |
| Shelf Life: | Minimum of 2 years from date of production in unopened cans, if stored in dry, well ventilated areas |
| Packaging: | Available in 25 Kg |
