*Rust-Oleum EpoxyShield Fine Crack Repair
Please note, this product is discontinued. Contact our technical team for a suitable alternative.
Rustoleum EpoxyShield Fine Crack Filler (formerly Anglo Epoxy Crack Filler) is a product used to quickly repair the finest of cracks of up to 3mm wide.
Rustoleum EpoxyShield Fine Crack Filler (formerly Anglo Epoxy Crack Filler) is a product used to quickly repair the finest of cracks of up to 3mm wide. Rustoleum EpoxyShield Fine Crack Filler is part of our excellent range of Concrete Repair products designed for use on Floors and some vertical substrates.
Best Uses
Rustoleum EpoxyShield Fine Crack Filler is a 2 part, liquid epoxy, repair product, ideally used on floors and for repairing small cracks of up to 3mm wide. Available in 500ml tins.
Part of Rust-Oleum's range of Concrete Repair solutions.
- Formerly Anglo Epoxy Crack Filler
- Use EpoxyShield Fine Crack Filler to recoat after 4 hours (at 20 Degrees C.)
- Use 500 ml for 25 metres (2 mm wide, 5 mm deep)
- FREE plastic scraper included
Application
Rustoleum EpoxyShield Fine Crack Filler is easy to apply and is full dry in 4 hours ready for a recoating. Rustoleum EpoxyShield Fine Crack Filler comes in 500ml containers and is designed for filling 25 metres of cracks at 2mm wide and 10mm deep.
Surface and Environment
Rustoleum EpoxyShield Fine Crack Filler is designed for use on concrete surfaces where small cracks appear. Use Rustoleum EpoxyShield Fine Crack Filler on flooring that's been damaged, to revitalise it and give it a new appearance when an overcoating is applied. Rustoleum EpoxyShield Fine Crack Filler can be used internally or externally for the quick repair of cracks and holes.
| Components: | Two Part |
| Type: | Liquid Crack Filler |
| Finish: | - |
| Stock Colours: | Grey |
| Tintable: | No |
| VOC Content: | <30 g/l |
| Volume Solids: | 100% |
| Suitable Substrates: | For concrete |
| Application Method: | Plastic Scraper |
| Theoretical Coverage: | A package of 500 ml fills a crack of 2 mm wide and 5 mm deep over approximately 25 linear metres (be aware of the fact that cracks can vary in depth and width). The coverage as mentioned here is therefore only a guideline/estimate. |
| Wet Film Thickness (WFT): | - |
| Dry Film Thickness (DFT): | - |
| Induction Time: | - |
| Pot Life: | 20 - 30 minutes at 20°C |
| Touch Dry: | - |
| Overcoatable: | 3 - 4 hours at 20°C (curing time will be extended by low temperatures) |
| Fully Cured: | - |
| Cleaner / Thinner: | - |
| Shelf Life: | Minimum of 1 year from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C |
| Packaging: | Available in 500ml |
