SKU: ID4095
***
*Rust-Oleum Frosted Glass Aerosol
This product is now unavailable.
Out of Stock
PRODUCT DETAILS
Please note, this product is now unavailable via Promain. Contact our Technical /team for an industrial alternative.
Rustoleum Frosted Glass Aerosol is a high quality product used to create a translucent effect on transparent surfaces including glass doors, windows, skylights and greenhouses.
Rustoleum Frosted Glass Aerosol can be used to create decorative effects on all clear surfaces.
Best Uses
Rustoleum Frosted Glass Aerosol is best used to add a semi-transparent, frosted decorative effect on mirrors, glass accessories, windows, skylights and greenhouses.
Part of Rust-Oleum's range of aerosol paints.
Application
Rustoleum Frosted Glass Aerosol is a fast way of adding decoration to a variety of transparent surfaces and can be sprayed directly onto the surfaces or over a stencil for a more accurate finish.
Surface and Environment
Rustoleum Frosted Glass Aerosol can be applied to all transparent glass and plastic surfaces and should be used on an interior basis only.
TECHNICAL
Features
- Create a translucent frosted glass effect on transparent surfaces including glass doors, windows, skylights and greenhouses.
- For a decorative effect, use with stencils to create a beautiful etched glass look on mirrors, glass accessories and more.
- Adds a semi-transparent coating for decoration or privacy.
- Apply to glass or mirrors.
- Creates the look of custom etched glass when applied with stencils.
- Indoor use only.
Technical Info
| Components: | Single Pack |
| Type: | Aerosol |
| Finish: | Frost |
| Stock Colours: | Clear |
| Tintable: | No |
| VOC Content: | - |
| Volume Solids: | - |
| Suitable Substrates: | Glass, Doors, Windows, Skylights & Greenhouses |
| Application Method: | Shake can vigorously for 1 minute after mixing ball begins to rattle continue to shake regularly during use. |
| Theoretical Coverage: | Approximately 1.5m² per coat dependant upon surface profile/porosity. |
| Wet Film Thickness (WFT): | - |
| Dry Film Thickness (DFT): | - |
| Induction Time: | - |
| Pot Life: | - |
| Touch Dry: | 10 minutes at 20°C |
| Overcoatable: | After 10 minutes at 20°C |
| Fully Cured: | - |
| Cleaner / Thinner: | If the valve clogs during use, remove and rinse with white spirit. |
| Shelf Life: | - |
| Packaging: | Available in 400ml cans |
RELATED PRODUCTS
