PPG Sigmarine 35 is a micaceous iron oxide alkyd topcoat designed for use on a variety of structures in industrial exposures that are exposed to adverse atmospheric conditions.
Sigmarine 35 is best used to provide UV resistance to exterior applications with a MIO effect finish suitable for marine appliances used on an exterior basis.
Sigmarine 35 can be applied using brush, roller or air and airless sprays with ultra fast drying time of just 1 hour. An interval of 16 hours should be followed as instructed before applying a second coating. Sigmarine 35 has a theoretical coverage rate of 10.2m2 per litre.
Surface and Environment
Sigmarine 35 can be used on surfaces that are clean, dry and free from contamination and have been suitable primed with Sigmarine 24. Sigmarine 35 works exceptionally well externally in conditions that can often prove to be harsh and damaging in an industrial environment.
- Micaceous iron oxide (mio) alkyd topcoat
- Excellent resistance to atmospheric industrial exposure conditions
- High UV resistance
|VOC Content:||254.0g per Litre|
|Suitable Substrates:||For steel|
|Application Method:||Brush, Roller, Air Atomised Spray or Airless Spray|
|Theoretical Coverage:||10.2m2 per litre at 50 microns|
|Wet Film Thickness (WFT):|
|Dry Film Thickness (DFT):||50 - 75 microns|
|Touch Dry:||1 hour at 20°C|
|Overcoatable:||After 16 months at 20°C|
|Cleaner / Thinner:||PPG Thinner 20-05|
|Shelf Life:||At least 12 months when stored cool and dry|
|Packaging:||Available in 4 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.