Rustoleum Pegakote Floor Paint

SKU
ID400
Part A: Non Hazardous, Part B: UN3082 (Class: 9, Pk Grp: III)
A hard wearing two-component water based epoxy floor paint and wall paint for interior use.
Available in various sizes. Tintable from the Colour Shop range of over 35,000 colours.
From £62.57 £52.14
In stock
Only %1 left
Product Description

Rustoleum Pegakote Water Based 2 Pack Epoxy Floor Paint for use in garages, warehouses, showrooms, corridors, indoor car parks, workshops etc.

Rust-Oleum Pegakote Epoxy Floor Paint is a very hard two-component water dilutable epoxy coating designed for interior use on floors and walls. Exceptional abrasion resistance, resistant to oils and solvents, easy to clean, almost odourless and solvent free. Pegakote is suitable for use in garages, warehouses, showrooms, corridors, indoor car parks, workshops, commercial kitchens etc.

Best Uses

Rust-Oleum Pegakote Epoxy Floor Paint is best used in garages, warehouses, showrooms, corridors, indoor car parks and workshops. Rust-Oleum Pegakote is suitable for use on walls as well as floors, and we would advise that this product only be used for indoor applications. Recommended for use on floors that are subjected to heavy abrasion, as the product provides very good abrasion resistance and has excellent anti slip properties. Rust-Oleum Pegakote has been used for painting large indoor car parks, as you can see in the case study history.

  • Pegakote is available in the Colour Shop range of over 35,000 colours
  • Exceptional abrasion resistance
  • Resistant to oils and solvents
  • Low odour
  • Easy to clean
  • Available in a wide range of colours

Application

Rust-Oleum Pegakote Epoxy Floor Paint should be applied using roller or airless spray. We would recommend the use of roller for a cleaner end result. When applying Pegakote, the room temperature should be no less than 8°C. This product is touch dry in 9 hours and recoatable after 24 hours.

Surfaces and Environment

Rust-Oleum Pegakote Epoxy Floor Paint is best used in domestic and commercial garages, warehouses, commercial kitchens, showrooms, corridors, indoor car parks and workshops.

Technical Details
Components: Two Part
Type: Water-based Epoxy
Finish: Satin
Stock Colours: Steel Grey, Light Grey
Tintable: Yes. Please note, bespoke tints are non-refundable / exchangeable
VOC Content: 0 g/l
Volume Solids: 48% - 50%
Suitable Substrates: Mineral substrates (old concrete, tiles, glass etc.)
Application Method: Brush, Roller, Airless Spray
Theoretical Coverage: 300 gms per m2 per coat. 50m2 per 15kg tin per coat
Wet Film Thickness (WFT): 200 microns
Dry Film Thickness (DFT): 100 microns
Induction Time: -
Pot Life: 2 hours at 20°C
Touch Dry: 9 hours at 20°C
Overcoatable: 24 hours at 20°C, 48 hours at 8-10 °C
Fully Cured: 7 days at 20°C
Cleaner / Thinner: Water
Shelf Life: 2 years
Packaging: Available in 4 Kg and 15 Kg

Related Products