Sika Sikafloor® 91

SKU
id22179
Non Hazardous
A resin based epoxy mortar for patching and screeding industrial floors, which are subject to heavy traffic.
Available in 27.5 Kg in Dark Grey
£147.84 £123.20
In stock
Product Description

Sika Sikafloor 91 is an epoxy resin based mortar for patching and screeding industrial floors that are subject to heavy traffic.

Best Uses

Sika Sikafloor 91 is a three component coloured, solvent-free, epoxy resin based mortar for patching and screeding industrial floors, which are subject to heavy traffic.

Sikafloor-91 is suitable for industrial and commercial flooring in locations such as warehouses, workshops, chemical, pharmaceutical, water treatment plants, breweries and steel works.

Application

Concrete surfaces must be mechanically prepared, using abrasive blast cleaning or scarifying equipment to remove cement laitance and ensure an open textured surface. The Silkafloor-91 is a three component system and the Product Data Sheet should be read, prior to commencement, to ensure the correct preparation, adhesion and moisture restraints are observed.

Surface and Environment

Concrete substrates must be sound and of sufficient compressive strength. They must be clean, dry and free of all contaminants such as dirt, oil, grease, coatings and surface treatments, etc. This resin coating provides a high strength resistance to the mechanical and chemical abrasion that is a product of industrial and commercial environments.

Technical Details
Components: Three Pack
Type: Solvent Free Epoxy Resin
Finish:
Stock Colours: Dark Grey
Tintable: No
VOC Content:
Volume Solids: 100%
Suitable Substrates: For patching and screeding industrial floors that are subject to heavy traffic
Application Method: Brush, Roller or Squeegee
Theoretical Coverage: 2.2 Kg per m2 per mm
Wet Film Thickness (WFT):
Dry Film Thickness (DFT):
Induction Time: N/A
Pot Life: 40 minutes at 20°C
Surface Dry:
Overcoatable: Between 14 hours and 2 days at 20°C
Fully Cured:
Cleaner / Thinner: Clean all tools and application equipment with Sika Thinner C immediately after use. Hardened and / or cured material can only be removed mechanically.
Shelf Life: 24 months from date of production
Packaging: Available in 27.5 Kg

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use