Teamac Zinc Rich Primer Cold Galvanising

SKU
id3615
UN1263 (Class: 3, Pk Grp: III)
A metallic zinc that allows conductivity in the dried film layer.
Available in 1 and 2.5 Litres in Grey
From £50.81 £42.34
In stock
Only %1 left
Product Description

Please note, the manufacturer is advising delivery will take a minimum of 5 days for delivery of this product.

Teamac Zinc Rich Primer (Cold Galvanising) is best used as a cold galvanising paint as protection against corrosion on zinc, aluminium, steel and iron.

Teamac Zinc Rich Primer (Cold Galvanising) Paint for Metals, is a high performing product based on a concentration of metallic zinc and allows for conductivity in the dried film layer. Used to offer protection to galvernised steel after cutting or grinding and as a sacrificial coating similar Galvafroid to protect the steel.

Best Uses

Teamac Zinc Rich Primer (Cold Galvanising) is best used as a cold galvanising paint and can be used on a variety of different substrates, including, zinc, aluminium, steel and iron. Teamac Zinc Rich Primer is for use on iron and steel as protection against corrosion. The coating must be in direct contact with the iron or steel to work correctly.

Application

Teamac Zinc Rich Primer (Cold Galvanising) is available in 1 litre and 2.5 litre containers and can be applied using brush, roller or spray to produce a fantastic finish ready to protect any metal substrate.

Surface and Environment

Teamac Zinc Rich Primer (Cold Galvanising) can be used internally or externally for the priming of metal, ready for a decorative over coating. Teamac Zinc Rich Primer can be used internally or externally for cold galvanising.

Technical Details

Notes

  • Teamac Zinc Rich Primer (Cold Galvanising) contains a high concentration of metallic zinc and allows for conductivity in the dried film
  • Teamac Zinc Rich Primer (Cold Galvanising) acts as a 'cold galvanising' type paint

Technical Info

Components: Single Pack
Type: Cold Galvanising
Finish: Matt
Stock Colours: Grey
Tintable: No
VOC Content: 381 g/litre
Volume Solids: 56.8%
Suitable Substrates: Iron & Steel
Application Method: Brush or Airless Spray
Theoretical Coverage: 8 m2 / litre
Wet Film Thickness (WFT): 125 microns
Dry Film Thickness (DFT): 70 microns
Induction Time: -
Pot Life: -
Touch Dry: 30 minutes at 20°C
Overcoatable: After 8 hours or overnight at 20°C
Hard Dry: 8 hours at 20°C
Cleaner / Thinner: Thinners 15 or Thinners 16
Shelf Life: -
Packaging: Available in 1 Litre and 2.5 Litres

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use