Teknos Anti-Stain Aqua 5200-00

SKU
id21952
Non Hazardous
A water borne industrial primer for new wood formulated for exterior use such as windows and doors.
Available in 20 Litres in Opaque White and Antique White
From £210.24 £175.20
In stock
Only %1 left
Product Description

Teknos Anti-Stain Aqua 5200-00 is a water borne industrial primer for new wood formulated for exterior use such as windows and doors.

Best Uses

Teknos Anti-Stain Aqua 5200-00 is a highly versatile, robust and easy to use softwood primer, which typically is used for exterior windows, doors, shutters, conservatories or claddings. Formulated to minimise yellowing from knots and softwood with a large amount of heartwood.

This product is typically suited for application to softwood, which has been pretreated with a suitable Teknos Wood Preservative.

Teknos Anti-Stain Aqua 5200-00 is available in opaque white or antique white. It can however be supplied in factory tinted pastel colours, which can be developed based upon a white base (e.g. light grey). 

Application

The wood must be clean and free from wood dust and contamination. The moisture content of the wood should be approx. 13% and should not exceed 15%. All softwood for exterior use should either be vacuum impregnated or treated with a wood preservative. Apply using airmix (aircoat) or airless by hand or in automatic spraying equipment.

The product is delivered ready for use. Stir the product well before use. Primed parts must always be protected with a topcoat treatment before they are exposed to the influence of the weather.

Technical Details
Components: Single Pack
Type: Water Borne
Finish:
Stock Colours: Opaque White and Antique White
Tintable: Yes, to pastel shades made from a white base. Please note, bespoke tints are non refundable / exchangeable
VOC Content: 11 g/L
Volume Solids:
Suitable Substrates: For exterior wood
Application Method: Airmix (aircoat) or airless by hand or in automatic spraying equipment.
Theoretical Coverage: 5 - 8 m2 per litre
Wet Film Thickness (WFT):
Dry Film Thickness (DFT):
Induction Time: -
Pot Life: -
Dry To Handle: 2 - 3 hours at 20°C
Overcoatable: 3 - 4 hours at 20°C
Fully Cured:
Cleaner / Thinner: Clean equipment with water
Shelf Life: The product must be stored at temperatures above 5 °C. Shelf life in unopened containers: See “Best before date” on the label. Keep containers tightly closed after use.
Packaging: Available in 20 Litres

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.