Teknos Aqua Primer 2907-02 is an aqueous industrial wood preservative for new untreated wood designated for exterior use as defined in BS/EN 335-1 such as windows and doors.
Teknos Aqua Primer 2907-02 is formulated to protect the wood surface and the treated area against wood destroying and wood discolouring fungi. This product satisfies the performance requirements of EN 599-1. Furthermore the wood becomes more dimensional stable after use of this product.
Suitable for application via flow coating or dipping.
The wood must be clean and free from wood dust and contamination. The moisture content of the wood should be:
- Windows and doors: approx. 13 % and should not exceed 15%
- Cladding: 18 ± 2%
Teknos Aqua Primer 2907-02 is to be applied by flow coating or dipping, in brush machine, in vacumat or by brush. The product is delivered ready for use. Stir the product well before use. Due to evaporation, the solid content of the liquid must be adjusted with water regularly. This adjustment is based on the measured solid of the liquid in the system.
Treated parts must always be protected with a topcoat treatment before they are exposed to the influence of the weather.
|VOC Content:||.0g per Litre|
|Suitable Substrates:||For untreated new wood for use externally|
|Application Method:||To be applied by flow coating or dipping, in brush machine, in vacumat or by brush.|
|Theoretical Coverage:||May vary according to wood quality and application method.|
|Wet Film Thickness (WFT):|
|Dry Film Thickness (DFT):|
|Dry to Handle:||1 - 2 hours at 20°C|
|Overcoatable:||2 - 3 hours at 20°C|
|Cleaner / Thinner:||Equipement should be cleaned with water|
|Shelf Life:||The product must be stored at temperatures above 5 °C. Shelf life in unopened containers: See “Best before date” on the label. Keep containers tightly closed after use. Store away from foodstuffs.|
|Packaging:||Available in 18 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.