Teknos Teknofill 5001-00 is an aqueous product for spot filling of primed interior and exterior wood such as windows and doors.
Teknos Teknofill 5001-00 is formulated for the spot filling of Teknos primed wooden joinery such as windows and doors. This product is to be used together with Teknos Anti Stain Aqua 5200 in order to minimise resin penetration from knots in pine.
The primed wood must be clean and free from wood dust and contamination. The moisture content of the wood should be approx. 13% and should not exceed 15%.
All softwood should either be vacuum impregnated or treated with a wood preservative. Apply using a filling knife. Delivered ready to use.
Primed parts must always be protected with a topcoat treatment before they are exposed to the influence of the weather.
|Suitable Substrates:||For interior and exterior wooden joinery|
|Application Method:||Filling knife|
|Wet Film Thickness (WFT):|
|Dry Film Thickness (DFT):|
|Dry To Sand:||1 - 3 hours at 20°C|
|Overcoatable:||1 - 3 hours at 20°C|
|Cleaner / Thinner:||Clean equipment with water|
|Shelf Life:||The product must be stored at temperatures above 5 °C. Shelf life in unopened containers: See “Best before date” on the label. Keep containers tightly closed after use.|
|Packaging:||Available in 235ml Tubes|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.