Sherwin Williams Firetex M72 Intumescent Filler

SKU
ID12901
UN1263 (Class: 3, Pk Grp: III)
A solvent based intumescent mastic coating. For the repair of small areas of damage to Sherwin Williams Firetex range.
Available in 1 Litres
From £67.08 £55.90
In stock
Only %1 left
Product Description

Sherwin Williams Firetex M72 Intumescent Filler is a solvent based intumescent mastic coating used for the repair of small areas of mechanical damage to Sherwin Williams Firetex range of intumescent coatings.

Best Uses

Sherwin Williams Firetex M72 Intumescent Filler is a solvent based intumescent mastic coating used for the repair of small areas of mechanical damage to Sherwin Williams Firetex range of intumescent coatings.

Application

Recommended application via knife or trowel. A full range of primers have been fi re tested and approved for use under FIRETEX M72. For certain dry internal situations where the final colour / appearance is not critical, then FIRETEX M72 may remain un-topcoated.

For all other in-service conditions then either FIRETEX M71V2, Sher-Cryl M770, Acrolon C137V2 or Acrolon C237 must be used as topcoat as appropriate to end use conditions.

Scrape back all loose or damaged FIRETEX intumescent coatings to a firm edge. Where necessary spot prime with an approved primer. Apply FIRETEX M72 to level any surface defects, on larger areas two or more applications may be necessary. Ensure surfaces to be coated are clean, dry and free from all surface contamination. Application at ambient air temperatures below 5°C is not recommended.

IMPORTANT INTUMESCENT PRODUCT NOTE: Always contact Promain’s technical team prior to purchase to obtain a tailored project specification and the advice necessary. The information displayed on this website should only be used as a guide. Promain UK Limited will not be held liable for any resulting damage to property, human life or monetary costs incurred due to incorrect specification, preparation, application or maintenance that has occurred due to negligence by either the purchaser or applicator. This includes your failure to have contacted us to obtain the relevant advice/specification.

Technical Details

Technical Info

Components: Single Pack
Type: Solvent Based Intumescent
Finish: -
Stock Colours: Off-white
Tintable: No
VOC Content: 169 gms/litre
Volume Solids: 82 ± 4%
Suitable Substrates: Used for the repair of small areas of mechanical damage to FIRETEX range of intumescent coatings
Application Method: Knife or Trowel
Theoretical Coverage: -
Touch Dry: 1 hour at 15°C
Overcoatable: 4 hours at 15°C
Fully Cured: -
Cleaner / Thinner: Cleanser/Thinner: No 2
Shelf Life: 2 years from date of production unopened or 'use by' date where specified
Packaging: Available in 1 Litre