Hempel Epoxy Filler 35250
Hempel's Epoxy Filler 35250 is a solvent-free, epoxy filler, which when fully cured is resistant to water, aliphatic hydrocarbons, and related products.
Best Uses
Hempel Epoxy Filler 35250 can be applied in thick coats up to approximately 5mm without runs or sags.
Hempel's Epoxy Filler 35250 is recommended as a filler for metals, hardwood, and other rigid materials. Also recommended for filling of pinholes in welding seems and similar irregularities in steel work not later exposed to strong chemicals. For professional use only.
Application
Handle with care. Before and during use, observe safety labels on packaging and paint containers and follow all local and national safety regulations. Always consult Hempel’s Safety Data Sheet for this product along with the Product Data Sheet.
Remove oil, grease and other contaminants by suitable detergent cleaning. Remove salts, detergents and other contaminants by high pressure fresh water cleaning.
For New Build: Abrasive blasting to min. Sa 2½ (ISO 8501-1) / SP 10 (SSPC). Clean thoroughly by hand or power tool to St 3 (ISO 8501-1) / SP 3(SSPC). Avoid polishing. Remove dust, blast media and loose materials.
For Maintenance and Repair: Abrasive blasting to min. Sa 2½ (ISO 8501-1) / SP 10 (SSPC). Clean thoroughly by hand or power tool to St 3 (ISO 8501-1) / SP 3(SSPC). Avoid polishing. Remove dust, blast media and loose materials. Consult data sheet for more details.
Mixing ratio is - Base 35259 : Curing Agent 95250 (1 : 1 by volume) In general, thinning is not recommended. Stir well before use.
Service temperature:
- Maximum, dry exposure only: 140°C / 284°F
- Maximum, in water (no temperature gradient): 35°C / 95°F
Technical Info
| Components: | Two Pack |
| Type: | Solvent Free Epoxy Filler |
| Finish: | Semi Gloss |
| Stock Colours: | 19810 Light Grey |
| Tintable: | No |
| VOC Content: | 26 g/L |
| Volume Solids: | 99% |
| Suitable Substrates: | Filler for metals, steel, hardwood, and other rigid materials. |
| Application Method: | Putty Knife |
| Theoretical Coverage: | 1 m2 per litre recommended |
| Wet Film Thickness (WFT): | 500 - 5069 microns |
| Dry Film Thickness (DFT): | 500 - 5000 microns |
| Induction Time: | - |
| Pot Life: | 60 minutes at 20°C |
| Surface Dry: | 8 hours at 20°C |
| Overcoatable: | Between 8 hours and 24 hours at 20°C |
| Fully Cured: | 5 days at 20°C |
| Cleaner / Thinner: | Do not thin. Clean up with Hempel's Tool Cleaner 99610 |
| Shelf Life: | base 24 months, Curing Agent 36 months |
| Packaging: | Available in 1 and 5 Litres |
RELATED PRODUCTS
