£9.95 delivery on orders excluding certain products & postcodes *
Teknos Aqua Filler 1100 is formulated for priming internal wooden laths and doors, as well as MDF and fibre board indoors. The paint dries quickly, and it is easy to rub down. Teknos Aqua Filler 1100 gives a surface that has good filling properties and that can be top coated with water-borne paints.
The surface must be clean and dry. The moisture content of the wood is to be below 20%. The temperature of the air, the surface and the paint shall be above +15°C and the relative humidity of the air below 80% during the time of application and drying. The best result is achieved when the temperature of the air is +23 - +38°C, the relative humidity of the air 50 - 70% and the ventilation is good.
Before use, stir the paint thoroughly. Apply the paint by spray. Application with undiluted paint is recommended, but the paint can be diluted with water, if required.
Components: | One Part |
Type: | Water Borne |
Finish: | Matt |
Stock Colours: | White |
Tintable: | No |
VOC Content: | 33.0g per Litre |
Volume Solids: | 38% |
Suitable Substrates: | For wooden laths and doors as well as MDF and fibre board indoors |
Application Method: | Spray |
Theoretical Coverage: | 6 - 8 m2 per litre |
Wet Film Thickness (WFT): | 125 - 167 microns |
Dry Film Thickness (DFT): | 48 - 64 microns |
Induction Time: | - |
Pot Life: | - |
Touch Dry: | 40 minutes at 23°C |
Overcoatable: | After 1 hour at 23°C |
Fully Cured: | |
Cleaner / Thinner: | Water |
Shelf Life: | The storage stability is shown on the label. Store in a tightly closed containers. The best storage temperature is +10°C - +25°C. |
Packaging: | Available in 3, 10 and 20 Litres |