Teknos Teknoseal 4000 End Grain Sealer

SKU
id20562
Non Hazardous
An aqueous product for sealing of end grain of new wood designated for exterior use including wooden windows and doors.
Available in 750ml in Colourless
£13.75 £11.46
In stock
Product Description

Teknos Teknoseal 4000 is an aqueous product for sealing of end grain of new wood designated for exterior use including wooden windows and doors.

Best Uses

Teknos Teknoseal 4000 End Grain Sealer is an aqueous product for sealing of end grain of new wood. This product is formulated for exterior use including wooden windows and doors.

Application

The wood must be clean and free from wood dust and contamination. The moisture content of the wood should be approx. 13 % and should not exceed 15 %.
All softwood and non-durable hardwood for exterior use should either be vacuum impregnated (only softwood) or treated with a wood preservative.

Apply using a brush. Product is ready to use. Primed parts must always be protected with a topcoat treatment before they are exposed to the influence of the weather.

Technical Details
Components: One Part
Type: Synthetic Binder
Finish:
Stock Colours: Colourless
Tintable: No
VOC Content: -
Volume Solids: -
Suitable Substrates: For softwood and hardwood
Application Method: Brush
Theoretical Coverage:
Wet Film Thickness (WFT): -
Dry Film Thickness (DFT): -
Induction Time: -
Pot Life: -
Touch Dry: -
Dry to Handle: 30 minutes to 1 hour at 20°C
Fully Cured: -
Cleaner / Thinner: Water
Shelf Life: The product must be stored at temperatures above 5°C. Shelf life in unopened containers: See “Best before date” on the label. Keep containers tightly closed after use.
Packaging: Available in 750ml

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.