Teknos Timantti 20 is a semi matt water-borne acrylate paint for walls and ceilings indoors. Mildew-resistant, and suitable within a system with Teknos Timantti W as a moisture sealer system in wet rooms.
Teknos Timantti 20 is the topcoat within a system over Teknos Timantti W moisture sealer for wet rooms, approved by the Swedish Måleribranschens Våtrumskontroll (MVK). The product has been classified to Group M1 in Emission Classification of building materials.
Teknos Timantti 20 is especially suited for use on walls and ceilings in dry and humid spaces where good washability and abrasion resistance is required, e.g. in kitchens, bathrooms, halls, staircases, kindergartens, schools, hospitals, food processing premises and other similar facilities.
Teknos Timantti 20 can be applied to primed concrete, plaster, filler, brick, and building board surfaces according to the painting directions. The paint is also suitable for repainting old alkyd and dispersion paint coats.
See Teknos Timantti Clean for a scrubbable anti microbial version of this product.
Clean the surface from dirt and dust. Wash previously painted, dirty surfaces with Teknos Rensa Super paint cleaner. Matt down hard or gloss surfaces by sanding and thereafter remove the dust. For smoothing of irregularities in the surface choose a suitable filler from the Teknos Silora series. The dried filler is sanded down and the dust removed.
HUMID AREAS: Prime concrete, plaster, stopper, brick, and building board surfaces with Teknos Timantti W moisture sealer according to the directions for use.
IN DRY AREAS: prime the surfaces previously mentioned with Teknos Timantti 3 Primer.
|Type:||Water Borne Acrylate|
|Stock Colours:||Off-White T1327|
|Tintable:||Yes, via the Teknomix tinting system to RAL, BS Shades. Please note, bespoke tints are non refundable / exchangeable|
|VOC Content:||30.0g per Litre|
|Suitable Substrates:||For can be applied to primed concrete, plaster, filler, brick, and building board surfaces. The paint is also suitable for repainting old alkyd and dispersion paint coats.|
|Application Method:||Brush, Roller or Spray|
|Theoretical Coverage:||Previously painted surface: 7 - 10m2 per litre
Filler and wood fibre board: 6 - 8m2 per litre
Concrete and plastered surface: 4 - 7m2 per litre
|Wet Film Thickness (WFT):|
|Dry Film Thickness (DFT):|
|Dust Dry:||1 hour at 23°C|
|Overcoatable:||2 hours at 23°C|
|Cleaner / Thinner:||Water|
|Packaging:||Available in 2.7, 9 and 18 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.