Tensid Impreg Dust Binder

Non Hazardous
A waterborne acrylic copolymer surface dust binding treatment for concrete and masonry surfaces.
Available in 15 and 25 Litres
From £132.00 £110.00
In stock
Only %1 left
Product Description

Tensid Impreg Dust Binder is a waterborne acrylic copolymer surface dust binding treatment for concrete and masonry surfaces.

Best Uses

Tensid Impreg Dust Binder is an easy to use, low VOC, low odour sealer that provides a clear finish for use on concrete and masonry surfaces.

  • Low odour
  • Long lasting material suitable for interior and exterior applications
  • Fast drying – reduces down time
  • Provides a level of permeability


Apply using a low compression sprayer or brush onto suitably prepared substrates as per the data sheet recommendations.

Technical Details
Components: Single Pack
Type: Waterborne Acrylic Copolymer
Stock Colours: White Liquid
Tintable: No
VOC Content:  
Volume Solids:  
Suitable Substrates: Concrete, Masonry
Application Method: Low Compression Sprayer, Brush
Theoretical Coverage: 4-6m2 per litre
Wet Film Thickness (WFT):  
Dry Film Thickness (DFT):  
Induction Time: -
Pot Life: -
Touch Dry: 1 hour at 20°C
Fully Cured:  
Cleaner / Thinner:  
Shelf Life: 1 years minimum in original unopened containers.
Packaging: Available in 15 and 25 Litres

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.