Tikkurila Everal Aqua 10 / 40 / 80

Non Hazardous
Water based paint for use on either interior or exterior wood, window trims and metal.
Available in 2.7 Litres and 9 Litres
From £46.88 £39.07
In stock
Only %1 left
Product Description

Tikkurila Everal Aqua is a water based paint for both interior and exterior use. It is suitable for use on a variety of surfaces including wood, window trim and primed metal, it is available in three different finishes and a range of over 13,000 colours.

Best Uses

Due to it's high levels of resistance to UV rays and ever changing weather conditions, Tikkurila Everal Aqua is ideal for exterior use on items such as garden furniture. However, it is equally suitable for interior use on a range of surfaces including wooden furniture, doors, window trim, radiators, ceramic tiles, chipboard and primed metals, to name just a few.


To begin, all surfaces need to be thoroughly cleaned from dirt, dust and grease. If you are applying the paint to a previously painted surface then this should be cleaned with Tikkurila Maalipesu and any loose flaking paint removed prior to application.

In order to acheive the best results on new interior wooden surfaces, we recommend priming the surface with Tikkurila Everal Primer before painting. For exterior wood, Tikkurila Valtti Guard primer should be used.

For interior and exterior metals prime the surface with Tikkurila Rostex Super Akva. Although a primer is not always required when the area does not need corrosion protection, using a primer will improve adhesion and therefore the overall finish of the final coat.

To assist with adehsion when painting surfaces such as aluminum, copper, wood, plastic, glass or ceramic, ensure you roughen the surface and then apply Tikkurila Otex Akva Adhesion Primer before applying the top coat.

Technical Details

Benefits and Features

  • High durability from UV rays, high temperature and washing detergents
  • Anti yellowing
  • Wide choice of colours
  • Neutral smell
  • Quick Drying

Technical Info

Components: Single Pack
Type: Water Based
Finish: Matt (10) / Semi Matt (40) / Gloss (80)
Stock Colours: White
Tintable: Yes. to most RAL and BS colours. Please note, bespoke tints are non refundable / exchangeable
VOC Content: Below 100g/L
Volume Solids: Approx 36%
Suitable Substrates: Interior and exterior wood, chipboard and previously primed metal surfaces, ceramic tiles, glass, radiators
Application Method: Brush, Roller, Airless Spray 
Theoretical Coverage: Up to 14 m2/l per one coat
Wet Film Thickness (WFT): -
Dry Film Thickness (DFT): -
Induction Time: -
Pot Life: -
Touch Dry: Minimum of 4 hours at 23°C
Overcoatable: Minimum of 4 hours at 23°C
Fully Cured: 2-3 days at 23°C
Cleaner / Thinner: Clean tools with water immediately after use
Shelf Life: See container
Packaging: Available in 2.7 Litres and 9 Litres

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use