£9.95 delivery on orders excluding certain products & postcodes *
Otex Adhesion Primer is best used on surfaces that require extra adhesion. This includes surfaces such as, glass, tiles, melamine, aluminium, uPVC and zinc-coated sheet metal. As well as exterior window frames painted with polyurethane or catalytic paints. Furthermore, it is also suitable for use on interior wood, chipboard and metal surfaces.
All surfaces must be clean, dry and fully prepared as per the product data sheet before application. Apply Otex Adhesion Primer by brush, roller or airless spray. Stir well before use and thin (if necessary). For brush application thin with White Spirit 1050, and for spray application thin with spray Tikkurila Thinner 1032.
Sanding is not usually required, as Otex Adhesion Primer levels well. However, when a very smooth surface is preferred, you can sand with a fine dry sanding paper.
Components: | Single Pack |
Type: | Solvent Based |
Finish: | Full Matt |
Stock Colours: | White, Black |
Tintable: | Yes. Please note, bespoke tints are non refundable / exchangeable |
VOC Content: | - |
Volume Solids: | 48% |
Suitable Substrates: | Wood, Trim, Furniture, Doors & Windows, Metal, Galvanised Steel, uPVC, Floor Tiles, Wall Tiles |
Application Method: | Brush, Roller, Airless Spray |
Theoretical Coverage: | 8–10 m²/l |
Pot Life: | - |
Touch Dry: | Dust dry after approx. 1 hour |
Overcoatable: | Sandable and recoatable the following day. |
Fully Cured: | - |
Cleaner / Thinner: | Thinner 1032/1050. Clean tools with White Spirit 1050 |
Shelf Life: | See packaging |
Packaging: | Available in 3 Litres and 10 Litres |